cartridge suggestions w/ LP12

How much better do you think the Ruby would sound, I believe that there is a good trade in allowance for Benz micro products so I can go higher than "retail" with those

the ruby2 is a BIG step up from the h2 ( the ruby 2 is what i'm presently running). i didn't mention it, tho, because you seem to have issues with output.

There is a Ruby with a .8 mv output(Ruby H) that would be fine as far as output goes. The glider I use now is .9mv and that seems fine. After I buy this cartridge I won't have any pennies left to solder into the phono stage, if you know what I mean!
Scott

I had a glider on LP12/lvII, then upgraded to a H20. It was substantially better - definitely smoother, the wood comes through. I'm in the process of replacing that with the H2woodbody, which the guys at musical surroundings say is yet another step up.

I have a similar LP12 set up, incuding the Ekos arm. Hafve used Linn K18 and Klyde. While the Linn cartridges are def. easy to set up on the Ekos/LP12, I am not altogether convinced. My biggest issue is how they track mono or older stereo LP's. The rig is awesome with good audiophile vinyl and most cheap pressings, but I have a lot of problems with some mono LP's (even a couple of JVC MoFi's), and the noise level on some vintage Shaded Dogs and Mercury's is distracting (I use a Linto phono pre, so the gain SHOULD be adequate to the cartridge. BTW, my LP's are scrupulously clean (VPI 17 F) and the cartridge is correctly set up. Net, I am shopping around for a higher output cartidge (the Klyde puts out 0.4 mV) with potentially a different stylus geometry