Fluxbuster info

Although I do not own the fluxbuster, the Audioquest version of this was determined to work best by hooking up to the tone arm (RCA) connections, turn on for 20 seconds, rest for 5 seconds, three intervals total. With instructions from Kelly, and my experience, you should be able to get the results you want.

Albertporter is right. Do as he says.

I have one, and agree with Albert--just remember to do the drill for each channel, as the Fluxbuster only does one channel at a time. Plug it in, insert the RCAs, tilt the rocker switch towards the channel to be done, watch the flashing lights till it indicates "done", then repeat for the other channel. If you have a P-mount cartridge, that's what the raised portion on it is for. Good luck!

I just cannot resist the urge to pipe up as well:
Albert is right, Rcprince's instructions are precise, so Joe you can safely flux your bust and enjoy. Regards, KD

Thanks everyone, this helps...Joe