Best way to enlarge spindle hole in vinyl records

Do not enlarge the spindle hole, this will lessen the physical coupling and devalue your records! Just press it to make it fit, records should not be loose when put on the spindle.

Blackie is right. The tighter the fit, the better it is.
(Honi soit qui mal y pense)

Get a "rat tail" file at a hardware store and slowly rim out the hole by rotating it; do NOT use a sawing motion. I occasionally have the same problem with my Walker Proscenium turntable, which has a larger than average spindle.

If all else fails use a saws-all and hog that hole out! just kidding, seeing as I have never used a record I could be the wrong person to ask, but simple logic would tell me that a saws-all would remedy your problem in a jiffy.

Tim

Again: for heaven's sake be careful, if you MUST play the enlarging game, which inspite of what has been said above, I would refrain from. If you get the hole too large and you do not have a nice fiting contact between spindle and the LP you will get variable pitch, which you will certainly hear, especially on long drawn out notes. Also it would not do the suspension of your cartridge much good on the long run, adding more lateral strain to it than necessary.