John Dunlavy On "Cable Nonsense"

Abe, I don't kmow. I took a long time to come around and be a convert/believer, and actually believe that the price of some wires out there are a good value too. Funny thing, the better my equipment got, the more I heard differences between cables, int's & cords. I am witnessing one of the best improvements in my setup recently- an improvement as big as a componant upgrade, really, and it was worth the $600, worth every dollar. I went from DH Labs T-14, to Coincident CST1. FOr the amount of improvement I got, I feel it's a real value.

Jay, I would agree that interconnects can present a noticeable difference in the sound of your system especially since the measurable and documented differences in the characteristics of these cables can have an affect on the output and input stages of components that might be sensitive to these effects - inductive reatance and capacitive reactance, both of which will alter the tone of an audio signal. On the other hand, I believe that these effects are less pronounced at the low impedance output of a power amplifier coupled to a speaker. A higher quality cable of lower resistance will provide a slight improvement in sound but my real gripe is with those very expensive cables that come packaged in very pretty cases with velvet lining and certificate of authenticity, etc. Snake Oil! Don't even get me started on AC power cords... there's another thread here on Audiogon where you can read in detail my strong opinion on this area of voodoo. :-)

Abe, the majority of my "fancy" power cords are all homebrew designs with the exception of a few TG Audio's, LAT's and a Kimber. While this might sound like ALL of my power cords are "bought and paid for", keep in mind that i have five complete systems set up in my house. That is a LOT of power cords. As such, the ones that were "bought and paid for" were all "snagged" via Audiogon, Audioweb, Audioshopper, Audioreview, etc.... for pennies on the dollar. As such, i have learned quite a bit via first hand experimentation with the resultant experience that comes with it WITHOUT going broke or spending much at all.

As to my hum problem, there is some type of strange reactance between two components that i can't seem to get rid of. Believe me, i've taken all of the normal "prescribed" routes with no luck at all. The fact that changing power cords even remotely affects the sonic output at the speakers DOES verify that they have more influence on what we hear than what most EE's would ever admit to.

As to you labeling them "tone controls", i think of them more as "filters". While they are both doing the same thing in terms of affecting amplitude, bandwidth, linearity, etc... the end result IS measurable in terms of a lower noise floor, improved s/n ratio, differences in frequency response, etc....

Like i said, break out the test equipment and learn something from all of this. It takes NOTHING to sit on ones' laurels and repeat what you've been told and "believe" to be correct. On the other hand, doing and learning can only benefit you in the future. Who knows, it might end up opening new avenues of thought for you OR simply reaffirm the beliefs that you already have. Are you afraid to put your beliefs to the test or challenge your "faith" ???

As i mentioned before, i WAS in the same shoes that you're in now. Trying to disprove the "idiots" using the same arguements that you've posted, i found out that the "idiots" actually new more than i did. Romex or not, power cords DO change the performance characteristics of a system. Sean
>

Sean, if you've purchased "high-end" AC cords for pennies on the dollar I should commend you for being reasonable where you spend your money on this crazy hobby. If we had limitless funds, we would all spend several thousand dollars on each component and every cable to get the false sense that we've spent enough money to have a "better" system than one that costs much less. Expensive interconnects are not always better than cheap ones, expensive speaker wires aren't always better than modest wires. In many cases they are just different or just sound different and not necessarily better.

I agree that a good power cord is essential but as I've stated before, I completely disagree that the AC power cord should even be considered as an area of experimentation for altering the overall "tone" of a system (as written about in the other thread). You mention that you prefer to think of the power cord as a "filter" instead of a tone control. Well, what is a filter? A filter passes certain frequencies and attenuates others - you're still essentially calling it a tone control! But I argue that the 60-cycle "tone" coming from your AC mains should hopefully be nearly eliminated through the filtering in the power supply section of your equipment. Why would one try to alter the supposedly audible characteristics of the AC power source when the goal is to eliminate it completely by turning it into pure DC current within the equipment? A good solid high-current capable power cord with decent low contact resistance to the AC outlet is sufficient in my book. I don't subscribe to the bogus claims from mega-buck power cord makers that their AC cords have some magical "sonic signature". So I reassert my opinion that spending more than $50 or so on an AC power cord is wasteful.

Abe, how many mega-buck power cables have you tried?