Which VPI LP Cleaning Machine?

I use Torumat cleaning fluid with great result. However, I would be most grateful if someone can reveal a good secret formula for low-to-medium income audiophiles to buy the chemicals and produce the solution ourselves. After all, how hard can it be???

For many years I have used the following simple solution with very satisfactory results, and, most importantly, no harm across several thousand LPs:

20% Isopropyl Alcohol (91%), with no additives
80% Distilled water
12-20 drops of Kodak PhotoFlow per gallon (to reduce surface adhesion)

Mixing this up is simple: Buy a 1 gallon container of distilled water, pour off a little more than a quart into a separate clean container, then pour 1 quart of isopropyl alcohol into the gallon container, add the PhotoFlow, and top off the gallon container with some of the distilled water you poured off at the outset.

Some people contend that a surfactant should also be added as a "detergent" agent to be effective, but I've yet to find a recommendation with which I've felt comfortable so I've stayed with the formula above. There is also some contrary opinion about the use of the PhotoFlow, but I've not observed any problem in over 15 years. In my experience the PhotoFlow is necessary to get the fluid into the record grooves.

One can work multiple options on how pure should be the alcohol and distilled water. I've always used what I find in the local drug store.

VPI 17 record cleaner still going strong.

Rushton, thanks for your response. I am getting down to my last VPI refill and am going to use your recipe with one addition. 5 drops of tub and tile. This is what was told to me in my current batch of cleaner. Your recipe is identical except the t&t.

enjoy the music!

I have a 16.5 and my brother-in-law has the 17. I have been happy with the 16.5 but since I saw the 17 work a few times I have to admit it is a much better cleaner. Can you justify the cost difference???