Power cord? Why?

Eldartford: How are you going to configure this wire geometrically ? Are you including a ground in this buch of six or are you using 3 hots and 3 neutrals ? Sean
>

sean...3 Hot, 3 Neutral, stacked and twisted as a stack. I am using a 3 prong plug and I have a ground wire connected, but since the original design had no ground wire on the power line (there is a separate grounding lug on the chassis) this conductor is not integrated with the other six.

I would have staggered the conductors and then twisted it. Oh well, i'm still curious to see how this comes out. Sean
>

sean...what do you mean "staggered"?

My "stack" is HOT/NEUT/HOT/NEUT/HOT/NEUT/

When you said "stacked", this made me think of three pieces of zip cord standing side by side in a row i.e. "hot / hot / hot" stacked on top of "neutral / neutral / neutral" and then twisted. By staggering the conductors, i meant exactly what you ended up doing, i.e. alternating polarity for every other wire. That should work fine from what i can tell. My only thoughts are "good luck" in getting all of these properly terminated into a connector : ) Sean
>