2. analog
  3. 1058158552

The ''hole'' problem

On many Lp's from the 80's I have notices that the hole in the center of the LP is very ragged and frequently undersized. I have just had a wretched time getting one of these off my turntable.

Any tricks to clean these up. I am assuming that concentricity is important, or I would just use a reamer, but a reamer is probably the best answer. A nice tool that would fit on the record vaccuum would sure be convenient.
jpharris
nrchy's avatar
nrchy
2,124 posts
 
It's called a de-burring tool.
cosmic_void
142 posts
 
I believe you are looking for a reamer. It looks like a conical drill bit with handle T-boned on the end. Unlike a drill bit, a reamer has it's cutting edges on the sides. Go slow as you may remove too much material. Good luck.
pbb
1,140 posts
 
Love vinyl! The accuracy of it all! Excentric holes, undersize holes, oversize holes, off center labels with part of it covering the hole. That's just the problems with the hole. It is, in fact, remarkable, that some vinyl sounds as good as it does. Now that's a hobby when you have to ream something to get it to work. Model railroading provides for many reaming opportunities. A great hobby also.
4yanx
1,576 posts
 
On the subject of the need for a good reaming,......oh, never mind. ;-)
pbb
1,140 posts
 
4yanx: don't even go near that one...
More to discover