By the way, optimal impedance loading for the cartridge at the stepup is usually different from that at the preamp. You will have to research what this is for your Benz and shop for your stepup accordingly. The stepup likes to see 47K at the phono stage (ie MM).
MC Transformer or phono stage - help anyone?
I am seeking the sage advice of all the vinyl experts. I have a Benz ruby 2 on an Audiomeca romance arm and turntable. I run it through the moving coil section of my Musical Fidelity Nuvista M3 integrated. The cartridge is medium output (.4 mV) and while I am happy with the sound I suspect the phono stage is the weak link of my system. I notice the bass to be a bit weak particulary lower notes. Does anyone have comments on what sort of improvement adding in either a good moving coil phono stage or transformer would have (little or large). If so which would you recommend (stage or transformer and brand)? I have tried to read up on this but still end up quite uncertain. My price range is uncertain - I would say what would I have to spend to see a reasonable difference. I would hope somewhere between 1-2,000 but less would not be bad. Options I wondered about were the Benz stage or the 47 labs phono cube. The rest of my system by the way is listed. The room is a large one (18 X 40 with cathedral ceilings and I listen to mostly classical and jazz, but some rock as well. Thanks in advance for taking the time to read this and any help would be greatly appreciated.
Gary
Gary
- ...
- 12 posts total
- 12 posts total