2. analog
  3. 1056461792

"Beginner" audiophile Turntable for $200-$300?

I'm yet another "newbie" wanting to listen to my long-time stale album collection (primarily pop). I don't see myself being a tweaker, at least in the beginning - I just want a "plug & play" turntable, I suppose, for now. I just want to set it up and play my albums - but I do want the most accurate reproducibility of the information on my albums as I can get with $200-$300 (my budget, more or less).

It's the techie/perfectionist in me to make sure that I get a good deal (which means I can upgrade parts - rather than the whole thing...so that I could spread the costs across many paychecks ;-). This is how many of my other hobbies are (Ham Radio, PCs, etc.).

It would seem that if I only wanted "plug & play", and since I'm just a newbie in this, I would go with the less expensive Music Hall MMF-2.1 (which is NOT upgradeable). No one recommends the even less expensive Sony PS-LX350H (or anything from Sony) which is where I began my journey researching this topic. The MMF-2.1 seems to be THE entry-level/beginner audiophile turntable. But, based on reviews and posts, I'm worried about Music Hall's apparent lack of quality workmanship throughout; lack of a good manual (especially for a newbie that doesn't know how to properly setup a more "audiophile" like, manual turntable); and the fact that "just" another $100 (or so) would get me a much better sounding turntable (based on my research so far) that is at least somewhat upgradeable (NAD 533).

The reviews and posts on the NAD 533 are much better than for the MMF-2.1 - and I understand that the tone arm is "basically" a Rega RB-250. In deed, the entire turntable is OEM'd by Rega for NAD and is slightly different than a Rega P2. Based on reviews & posts, I also plan to upgrade to a better cartridge than the one that comes with the NAD 533 - but that's another $100! ARGGG!!!! Oh well, maybe later (I just want very good reproducibility - so I lean toward purchasing a new cartridge before I spend any effort on listening or transferring my album collection to CD - at least for in-car listening).

The VPI HW-19 Jr looks like the ultimate in upgradeability, especially in that it can be upgraded to a full-blown TNT Series 5! But, I cannot see paying $600/$650 (at the minimum, for a used one) right now.

So, I'm strongly leaning toward the NAD 533 for now!

I appreciate any suggestions/recommendations/feedback.

Thanks,

Wes
wlusk5fd8
wlusk5fd8 OP
20 posts
 
I appreciate the feedback everyone.

Jimbo3, I was afraid this would come up eventually. Afraid because I have what would no doubt be considered a "low-fi" Kenwood system (made for the masses). It's a fairly basic Kenwood A/V integrated receiver that cost about $350 6 years ago and only has Dolby Pro Logic (at the time Dolby Digital was way too expensive for me).

I understand that both Music Halls and the NAD are much higher grade ("mid-fi"?) than my entire system, currently. But, I didn't want to play the upgrade game (losing even more money) with every component in my system and another turntable. I am fully prepared to wait a bit longer in order to save up a little extra now for a better turntable. So that I can enjoy it longer before upgrading it again in the near future (like I will have to do for the rest of my A/V components, already).

My current A/V Receiver DOES have phono inputs, but probably not on par with what either the Music Halls or the NAD can produce. This leads me to a question, if I were to upgrade my phono stage (isn't that what we're talking about here?) to say a PP-1 Phono Preamplifier for example, do I then simply plug its output into one of my Receiver's AUX inputs (standard RCA jacks)?

Thanks,

Wes
wlusk5fd8 OP
20 posts
 
Psychicanimal,

Do I understand you properly...are you saying that, at least in your opinion, the Technics SL-BD22 is a better turntable than both the MMF-2.1 and the NAD 533?

Also, I don't buy much from Crutchfield - I just use them as a source of information (a starting point). I can almost always find the same product cheaper elsewhere (especially online!).

Wes
wlusk5fd8 OP
20 posts
 
Bomarc,

After re-reading your post about Sony vs. the Technics, when you said the following:

"I also wouldn't buy a table with a no-name cartridge, like the Sony. And upgrading the Sony means dealing with a standard-mount cartridge. Welcome to the finicky perfectionist side of audiophilia! (It's quite doable, but you have to learn how to do it.) By contrast, the p-mount on the Technics (I'd go for the better one) really is plug-and-play."

Are you then saying that changing a standard-mount cartridge (which the Music Halls and the NAD have, don't they?) is fairly complex (at least for a "newbie")?

If this is what you were saying, then I agree with both you and Psychicanimal that I should start out with the ease and "plug & play" of the Technics turntables (and their p-mounts). And see if I think I want to be a "tweaker" audiophile in the future (and hence upgrade to a more "standard" audiophile turntable, which will be more complex). I really don't care about resale value. Heck, I might even give it away to a friend...if I even upgrade at all.

Maybe I should do some more thinking about this...

Wes
jimbo3
304 posts
 
Wes- Fear not!! You're system is light years ahead of my first system. Most of us have been where you are. Haven't looked lately, but Kenwood used to be pretty good sounding gear for the dollar- much better than most of the other mass marketed brands. Reminiscing for a second, I used to have a Kenwood 40 wpc integrated amp which blew the socks off a friend's 120 wpc Pioneer recvr.

Given your system and assuming that you plan to upgrade other components along the way, I'd stick with my original suggestion of a used P3, especially if you can find one with the Rega cartridge included. (No fussing with VTA or alignment as it's virtually fixed in the correct place.) For an extra $150 now, it would leave you free to upgrade other components a step or two and not be compelled to upgrade the table to take advantage of those components.

To answer your question about hooking up an outboard phono pre, you are correct- you plug it into "AUX".

A potential sytem upgrade path for your situation would be to then use the Kenwood's pre/pro output to a separate amp, then get an outboard phono amp and a cartridge upgrade. You didn't mention what speakers you had, but, after the amp, you might dive into a pair of main speakers. Then you could sell the Kenwood and pick up a separate pre/pro.

Speaking from experience, making one bigger step with each component is easier and much less expensive than making several 1/2 steps. You'll reach your goal quicker, easier and far less expensively. Plus, as you upgrade other components, you can immediately take advantage of the better quality you have already purchased along the way. The basic lesson is to PLAN and TAKE YOUR TIME! (Heck, up till a couple of weeks ago, my speakers were only less than 10% of the cost of my system and worked fine till I finally upgraded them two years after upgrading everything else!)

Regards
Jim
wlusk5fd8 OP
20 posts
 
Jim,

Well, I have 6 (probably low- or mid-fi) Infiniti speakers. The usual for Home Theater (my primary reason for purchasing my system, at the time)...2 fronts, 2 rears, center, and a powered Infiniti subwoofer. Not bad, but I would guess it would make most people who post on this forum laugh. ;-)

Well, I definitely am taking my time to plan. Dude, I'm a perfectionist...it's one of the things that I do best! ;-) This is why I'm posting such a question on a few message forums and doing research...probably over-analysis (again, one of the things I do best ;-).

I'm just trying to make sure that spending even $200 makes sense for "just a turntable"...much less $400+ - especially for a "newbie". If I get close enough to that $600 figure, I will have to wait and save just a little bit more and go the VPI HW-19 Jr. route...it just sounds like the way to go at that price point.

Funny enough, in doing a little more research on the Technics SL-BD22, one reviewer at Epinions.com had some quality issues with his and replaced it with a NAD 533 - which he said was a "major improvement!". :-)

Thank you very much for sticking with me and helping me (indecisive and all) to make this all important decision (at least to my pocketbook ;-).

Wes
More to discover