Rega P25 Tonearm Lift

My suggestion is that if you have a heigth problem with your lift then you also have a (vertical tracking alignment)VTA issue that needs resolved.
Contact Amusicdirect.com and buy the EASYRIZER for the rega and install it then set your VTA and you will also notice a differnce in the sound of the cartridge when set at the correct VTA

getting rega spacers 2mm and/or 4mm from www.needledoctor.com will always be helpful since you will be more flexible in terms of selecting a different cartridge in terms of VTA.

Ok a couple of thoughts...

First of all what you need to do is simply adjust the tonearm lift. There is a hex set screw that adjusts the height of the lift and you simply need to get that hex key from Rega. I suggest you contact your local dealer or if that doesn't work, email me off list and I'll get one for you.

It is not terribly unusual for a Rega table to come in with the lift a little off. Sometimes in shipping things move around, etc. It's a quick fix and not a major problem.

Second of all we sell Rega and Grado (among other cartridge brands) and we sometimes put a Grado on a Rega table. The combo can be very musical. Aside from the hum (I'll get to that in a moment) I do not know of any real problems with Grado/Rega combinations.

As for the hum... yes it does exist in some systems. We always test first. Part of the problem with the hum has to do with the fact that Rega arms have no ground wire. But the important thing to remember is that the hum does NOT occur during playback. I do not mean that it gets drowned out sonically. I mean it actually does not occur when playing, only when the stylus is off the surface of the record. Don't believe me? Try putting a humming Grado/Rega combo on the lead-out groove of a record. No hum - dead silent. For whatever goofy reason, as soon as any signal passes through the stylus, the hum is blown out of the circuit. I do not have a good explanation for this, but it is not B.S. when I tell you that the hum only occurs when the table is idle. Most customers see this demonstrated and then they don't care.

Hackmaster-Check the archives.I've tried to get this across several times about the rega/grado 'hum'being a non issue.
Actually I dont care anymore other than I bothers me a bit seeing bad advice given out to 'philes looking into this combo.

Okay, David99,I promise to never mention it again. And when the threads come up about "How come my Rega hums with my Grado cartridge", I'll just let you explain to them that it doesn't happen. And how you didn't want anyone to be told about the possibility, because you thought it was "bad advice". And how these people wound up with a humming TT, because you sought to silence those who may have warned them about it. Yes, I'll keep quiet about it, and I'll let you do the talking when the time comes.