2. analog
  3. 1038266342

Rega P25 Tonearm Lift

Here is my stupid question of the day. Hopefully somebody can help. I installed a Grado Sonata cartridge on my P25. Alignment and tracking force are set correctly. My problem is that the height of the cartridge doesn't allow it to clear the LP when using the tonearm lift lever. I have to manually pick the tonearm off the record when done listening. Does anybody know if the lift is adjustable-the manual makes no mention of it. Or-has somebody run into this with there own setup and perhaps developed a 'rig' for it? Any suggestions would be appreciated.
sg69
david99
1,467 posts
 
Sg69..Im glad your problem is solved.
re:hum- I dont think you are one of the lucky ones.
This 'hum issue' is bull and gets old.
I bet if you raise the arm and put it near the spindle and turn the volumn up fairly loud you will hear a low level hum.
It cant be heard during music or between tracks so you have to make an effort to hear it.
twl
3,251 posts
 
David, you're treading some pretty dangerous ground here. I tried to be nice about this. Calling my statements "bull" is not conducive to good rapport with me. Please discuss this in the area of "opinion", as I did. Thank you.

And I have not mentioned this at all since our agreement, even though an old thread on this popped back up again on this page. The post was old, and I cannot remove it.
david99
1,467 posts
 
TWI-You are right.The hum issue should be considered opinion.Its up to each individual to decide if they want to live with a TT/cartridge combo that isnt 100% quiet 100% of the time.

My last post was not directed at you however.
I do respect your opinion Tom and I consider you to be one of the more seasoned audiophiles on this site especially in the analog area.

Im sorry I offended you.

twl
3,251 posts
 
Thanks, Dave. Have a good weekend, and enjoy the tunes.
More to discover