Continuation of my Thread on VPI, Basis, Origin...


....Graham etc.
First off thanks all for your help and advice.

So here is where I stand. I believe that I have a good unit...Aries/10.5/helikon/Benz M2 BUT my integration was not thought out well. Possibly better match with cartridges and arm. I also believe that the weakest point in my set up is the 10/5 arm. So I am leaning to an upgrade to the arm. I hope I can keep my cartridges...I like to use both (one or two months at a time). My candidates are Graham 2.2, Origin Live (high end version) and then possible the Vector.
Now the question. If I got this route, so I change the table? Will a Basis 2500 make a difference, a Big difference?? My advice in another thread says yes.

Finally, this afternoon I was listening to the EMI recording of Rachmaninov "The Bells" and toward the end of side one, close to the spindle, I began to hear low level rumble for about 3-4 revolutions. Is this the result of poor anti-skate, turntable feedback, poor isolation (I have a pretty good table for the set-up) poor recording??? I tried this section of the record on BOTH cartridges and same results.

Comments please....again, Thanks
rwd
Hi Rwd. About the low level rumble on that record, there is some possiblility that it is the record that is the problem. If the rumble does not occur on other records, I wouldn't worry about it.

Regarding upgrades, the order of upgrading in analog systems is first the TT, then arm, then cartridge. Upgrading the TT will yield more sonic improvements, than upgrading the arm or cart. Also upgrading the arm will yield better sound than upgrading the cartridge. However, in your case, where you seem to have a particular difficulty with your arm/cart matchup, then this needs to be addressed.

Of course, personal opinions on which TT to consider, are subjective. My personal feeling on moving to the Basis 2500, is that it is a small move. It may be a little better than the Aries, but not alot(IMO). If you want to move up from the Aries, you are going to have to make a fairly major step, because you are getting into the area where small improvements start costing alot of money. A Verdier La Platine, or a TNT Mk V, or another turntable in that kind of range will be required to get significant improvements. This is not to say that the Basis or others wouldn't help, but the change won't be overwhelming(IMO).

Of course, and you knew this was coming, if you were to get a Teres Model 255 Signature in Cocobolo for about $2800, you would be way up there in the high end performance levels, for not alot of money. A major step up from the Aries, for about the same cost of the new Aries.

With a upgrade of the TT like this, all the changes in arm and cartridge will sound all the better, because the TT will give a better foundation for them to work with.

If you can't make the leap of faith to go with the un-auditionable Teres, then you are relegated to the major brands that we are all aware of. This is fine, except you have to pay alot more to get a similar performance level to the Teres.

If you email Chris at Teres, and tell him you are considering a 255, he may send you one to try out. You won't be sending it back once you hear it. Tell him you need the armboard cut for a Graham 2.2.

Phil Sieg, a reviewer for Listener magazine, who owns a Platine Verdier, posted this on Bottlehead Forum April 27,2002 after he reviewed the Teres and other offshoots from the Teres project.

"I will say this. If your TT budget will stand $3K (w/o arm & cart), you can make your final TT purchase. Certain manufacturers of 5-figure American tables should be very, very scared." Phil Sieg, Listener Magazine

So I am not alone in my opinions of this table.
I like Phil. I think that he is not only a good writer, but i also think that he knows his stuff. If he had that to say about the Teres, i would not doubt that it is a force to be reckoned with. Sean
>
I can not offer you any educated or experienced advice concerning the above choices, but the thing about your question that leaps out at me is, you don't even say exactly what it is about your current set-up you are not happy with. It does seem unlikely to me though, that between a modern arm such as the 10.5, and two such different and popular modern MC cart's as the Lyra and the B-M, that they would all be poor matches. Considering that the Aries is a well-regarded but unsuspended design, what is it supported by? Has everything been professionally set up, or set up knowledgably by yourself using the aid of precision guages? What are your phonostage and phono cable situations? I haven't seen your other thread, but it seems to me this one lacks sufficient information to draw conclusions based upon.