Super Tweak for Nottingham Space TT


Hello,

Just want to pass on to fellow Nottingham Space TT owners a superb tweak that I stumbled on by chance: Go to your nearest Bed, Bath & Beyond and grab one of those massive chopping blocks made of Canadian maple. Just replace the base that came with the unit with the chopping board. The improvement is not subtle; dynamics (both macro and micro), imaging, and noise floor are significantly improved. This tweak makes the Space look like a mini-version of the top of the line ANNA LOG! While I'm here, do you guys find the use of a clamp beneficial to the Space's performance? I bought a very expensive clamp and found the resultant sound overdamped.
aisip
Can anyone suggest a good MC low output cartridge to use with the Spacedeck/Space Arm combination? Thanks.
Jeff,

If you are sticking with the stock Space Arm, which is a unipivot arm, you need a high compliance cartridge. Check out the ones from Lyra or Koetsu. The low compliant Shelters (501 II & 901), are in theory, not compatible with unipivot arms; however, a lot of people are using them with the Space Arm with excellent results.

Good Luck,
Thanks Aisip. You anticipated exactly what I was thinking about, the Shelter 501. Have read much praise about this cartridge and was hoping I could use it. Another knowledgeable Audiogoner suggested it would not be a perfect match with the Space Arm but would work. If I started out with the Stock Space Arm with some suitable cartridge, would a future upgrade to a Origin Live Silver arm and Shelter 501 be easy? I mean does that arm simply go on the Spacedeck without any modifications?
Ok, I know the OL Silver is a better match, in theory, with the 501, and may very well be in application.

On the other hand, I have a 501 in my Spacearm/Spacedeck combination. The results are excellent, and I have done a comparison to several other cartridges, costing both less and much more than the Shelter, that were supposed to be better matches in terms of compliance. I know a local dealer with 30+ years of experience who recommends the 501 with that combination and has quite a few happy buyers. Over the past six months he has A/B/C/D'd quite a number of carts on this arm and very few have been the equal of the 501.

One thing to remember about the Spacearm, at least I know this is true for the later carbon versions after a discussion with the designer - Tom Fletcher has engineered into the pivot two stabilizing rods (which you can see if you look under the pivot shell). He claims that these specifically placed bars render moot some of the concerns with regular unipivot arms. I am not technically educated enough to measure the difference made by these rods but I will say that the 501 does A LOT more than just "work" with the Spacearm. In fact, and based on experience, saying the 501 will merely "work" on a Spacearm is a total understatement and a disservice to both the arm and cartridge, though I know the person that said such had very good intentions. ;-)
Thanks 4yanx I appreciate that info and may well go with the Shelter 501 MkII on a Spacearm.