Which Audio Interconnect would you recommend?

To clarify, I am looking for an interconnect between my amp and processor as well as a subwoofer interconnect. I am grateful for your input clarifying the differences between copper and silver interconnects. It looks like I should definitely steer clear away from pure silver.

I've gotten some non e-mail suggestions recommending DH LABs and QED. These are not pure silver cables/interconnects but are a mixture of copper/silver. Do these combination interconnects fall into the same category as the silver steak/silver bullet?

Any more suggestions re: good copper interconnects is still greatly appreciated.

Coachp,
No experience w/ QED but I do own the DH Labs BL1 Series II interconnect. For the $99 or less paid for it, it's a very good cable. It is silver-clad copper cable i.e. the core is copper with a silver coating. The Kimber Silver Streak is a little diff: signal wire = silver & return wire = copper. From whatever I know, Silver Audio Silver Bullet is a pure silver cable i.e. no copper in there.
My experience with DH Labs has been very good. Maybe others can chime in here re. their experiences w/ this cable.

For the money, people have also found great success in:
Signal Cable
Luminous Audio Technology

FWIW. YMMV.

Well i am burning in a set of Pulsar interconnects from VHAudio right now that are marvelous.I own the Straight Wire Rhapsody ll's and the Pulsars sound nicer to my ear.Nothing lost and gains to be had.I was immediately stricken by the naturalness of the cord immediately when i plugged it in.I also have a set of Ecosse Maestro's that i would not sell but the more i am listening to these Pulsars they may end up being my favorite of the three.It's amazing the difference in interconnects as i had thought the Straigt Wires were about the best i could obtain but i am glad i kept searching and listening.Got a meter pair of Pulsars for $150 which is very reasonable for this cable i believe.Good Luck and happy listening!!

I have to second Seekburk's recommendation of the VH Audio Pulsars. They are just a great IC - detailed, revealing and neutral top to bottom. Chris VenHaus(http://www.vhaudio.com) offers a 60 day evaluation period. The only thing to be aware of is that they do take quite awhile to burnin, but well worth it IMHO.

You can find lots of feedback about these ICs here on Audiogon as well on audioasylum.com

I have the Rotel 1075 and the Rotel 1068 as well....along with B&W CM 2 (Concept 2 speakers from the late 80's). The interconnect cables I went with were the QED Silver Spirals for the 4 channels (fronts and rears) and the DNM Reson with Eichmann Bullet Plugs for the Center channel. I'm thinking of moving over to the Harmonic Technology Truthlink for the front channels though.