I own a VPI Scout. I don't know how good the Scout is, but I feel the JMW-9 that comes with it is world class. Very rigidly coupled to the plinth, very fine bearing (if you can call it a bearing at all), and fine construction. In fact, I bet you can get very good sound with a decent table when you put in the JMW 9. VPI internally likes the 9 over 10.5 or 12.5 and I can "hear" why. Less (adjustment) is more (sound) really applies here.
Clueless and Seeking advice on TT purchase
Hi All:
I need a turntable without breaking the bank. Range about $1,200 - 2,000. Must admit I've lost track (actually I was never on track) of what is what in this price range and I've been so busy I can't spend that much time checking it out so I seek your advice. I see several units out there.
Basis 1400
Oracle MKII
The good news is that it is going in a system that is almost all diy by yours truly so it won't make that much difference anyway! I'm using my proprietary zip-cord for interconnects.
Thanks in Advance
Sincerely
I remain,
I need a turntable without breaking the bank. Range about $1,200 - 2,000. Must admit I've lost track (actually I was never on track) of what is what in this price range and I've been so busy I can't spend that much time checking it out so I seek your advice. I see several units out there.
Basis 1400
Oracle MKII
The good news is that it is going in a system that is almost all diy by yours truly so it won't make that much difference anyway! I'm using my proprietary zip-cord for interconnects.
Thanks in Advance
Sincerely
I remain,
- ...
- 25 posts total
I think you know whose ideas I'll second., I mean third! You have seen what I'm doing. You could do basically the same thing for a hell of a lot less time & money. There are easier ways too. IMHO, the only way to go! Joe's Teres |
Thanks all: Well the Scout looks like the off-the-shelf favorite and the Teres diy route looks like it may be the "best" overall. I've been following your thread Joe and a few others at the Teres site. I've talked to Tom a bit too so I know the value there. As I said above, I'm a bit on the busy side so another diy project anytime soon is a handful(I've got four diy-audio going now) and a recent move has my work conditions less than ideal for a few months. Maybe I will put this off until spring and do it right the first time. Or buy a Scout used if one comes up at a good price and turn it over when I do a Teres? Thanks all for the input keep the good ideas coming! I remain, |
Do yourself a favor and give Kevin Barrett a call: KAB Electroacoustics |
- 25 posts total