2. cables
  3. 1030337070

Cable directionality

I'm sure this has been discussed before but I missed it, so what is all this stuff with the direction of voltage flow with cables? Every cable you see any more has a little arrow on it. Since the signal is AC and travels one direction as much as it travels the other, what difference could this possibly make. I have talked to numerous co-workers (all electrical engineers) and they ALL say this is the biggest bunch of bunk they have ever seen. Since I am the only "Audiophile", I try to keep an open mind(I'm also the odd man out being mechanical.) Skin effect, resistance, capacitance, etc. are true issues. You pass power through a wire and it creates a magnetic field. You do deal with impedence and synergy with the driving source. How about a few technical answers from the audiophile community.
bigtee
marakanetz's avatar
marakanetz
5,473 posts
 
And another cable question to Orbeck:

How long it's needed to take off the statics from the dielectric if it's all we need to break-in the cable?

I would estimate it to tenths fractions of the second or even less...
bigtee OP
803 posts
 
Geeze, Here we go with the signal return, etc. The signal returns on the same line it went down in the first place. It is AC, therefore, it alternates according to frequency. What has the ground got to do with the signal wire other than it helps isolate the signal from the effects of interference. That is like saying that the AC line in your house alternates on the ground wire. I have taken bare wire (wonderwire to be exact) and plug one end into a CD player and the other into the amp. You know what---it worked fine (other than the radio station I picked up a few times.)
rives
953 posts
 
I'm glad we have a cable designer here--welcome Orbeck. As a physicist I like hearing the scientific explainations, when I can only surmise the bits I know about cables. It's certainly refreshing to the hocus pocus.
jjwinterberg
45 posts
 
BigTee,

Please don't confuse voltage with current. In order to drive your amplifiers to drive your speakers current must flow. The same thing happens in your AC line analogy. The cable shield issue that you are raising is real. Current will flow through the shield if the circuit driver and receiver are at a different reference potential.

Regards,

John
seandtaylor99
1,262 posts
 
OK so interconnect shielding is grounded at one end only, hence the cable is "directional".
But I have seen "directional" speaker cable, and I cannot think of any possible explanation for this. Can anyone offer a plausible explanation?
More to discover