Interconnect length


I have some new cabinetry for my audio gear which would now allow me to go to 1/2 meter lengths for nearly all connections instead of the 1 meter lengths I'm using now. Anyone have an opinion on whether it would be worth it to switch to the shorter lengths?

I suspect the mantra is here is "less is more" but I figured I'd ask the question to see if anyone has an opinion on the matter.

Cheers,

Phil
phil0618
said above:> "Hardly any current on the interconnects. 1/2m, 1m, 3m... no difference or none to speak of. Speaker cables, that's another story.."

Not sure exactly what that means but it seems to infer that
you do not have to worry about interconnect length because there is so little current. Actually that is precisely why you should be concerned in many instances. Long interconnects can present a lot of capacitance to the signal source which is difficult for them to drive because of the limited current. Power amps (pushing speaker cables) chave higher current capability and it is far easier for them to drive the added capacitance. In addition, you will generally pick up more noise in ICs than speaker cables.

If vinyl isn't involved a few inches probably won't matter.

I remain,
You always can subtract but can never add... if you should reposition in the future, that extra 1/2 meter can save you the trouble of buying the same thing twice.
No difference in sound but in any other application 1/2 meter is really short, I've got 2 sets of 1/2 meter and they worked great in my former configuation but are too short now, money saved now will cost you more later...
We all have different hearing abilities, and our systems all probably have different resolution. I can hear a difference between different lengths, even between one meter and a half meter. However, I will add that shorter does not necessarily always sound better. Trust your ears.
Actually "less is more". How many times do high-end companies brag that their new series pre, power...whatever component has a shorter signal path...shorter traces on printed circuit boards...shorter wire paths, etc.

I had the chance to speak with the owner/designer of some very high-end cables..and had mentioned that a "salesperson" had advised me to buy 1m. cables because they were the optimum length and that the .5m (which would serve my need then) would not sound as good. This owner/designer said the salesperson was just trying to sell me up (likely because of what they had in stock as well). He said the shorter the better...always...and he used the analogy of making all the wires inside your high-end pre-amp longer...you just wouldn't do it. He asked me not to mention his name/company on the net..and I won't.

However...as mentioned above, the 1m. would be easier to resale and if your storage changes in the future the .5m. could prove to be too short.