Help me spend $1,500 on cables


If you look up my virtual system you'll see that I have a mixmatch of cables. I've read in several places that the synergy between cables from the same manufacturer can bring a system up another notch or two. I'd like to give this a try and see if it helps in my system. I could use a little help.

As much as I like the Acoustic Zen Satori Shotgun speaker wires I have, I don't think I could afford an entire system of AZ (power, IC and speaker cable). So I'd like to get some opinions on a good brand that I could try with my system. I'd like to spend no more than $1,500, new or used for the following cables:

3-4 one meter Power Cords
4 one meter Interconnects
1 pair Speaker Cables - 8ft

Thanks for your help!

Steve
smccull
For power cords, you can start with Chris's flavor 1 and 2 cords. They're great and within your budget( You can make your own and it takes 1 hour to make each cord $35 per cable for the material.) Next on the interconnects. Depends on what component you have, this will vary by what type of equipment you own. This will cost you average about $250 a pair.
As for the speaker cables, $300 is the most you should ever spend.

Sure you can spend them on records, if your system still sound horrible then you'll probably choose not to listen to it at all.

The LPs or CDs are your source of music. The equipments are your source of musical representation or distortion ( depends on how you match your system.) What's more critical to you? You decide.
Sounds like a reasonable budget for all of the cables that you list here.
Hi Smccull,Iam not trying to be ulgy.If I had an extra $1500 to spend,I would upgrade my Turntable or my Phone Stage first.Get a strong system FIRST and then cables.I had a strong Cart but a weak Horse and my system was still weak
but I had good cables.
Chang, which power cords do you think outperform the Flavors 1 & 2 ? I would like to know your opinion, as I've *closely* followed your posts...
Not everyone like to walk up to change LP. Also, you have very limited selection on newer relase music. I do agree that cable is the last thing you should worry about but it is not something you should omit.
i.e. A friend of my was using 3 different $700+ (retailed price) interconnects on his system. For some reason, it made the amp sounded so so but he was not willing to spend over $1500 retailed on any cable ( because the new prices are outrageous, most us only buy used cables.) After I had him tried my version of the "amp" cable, it brought out all the openess, full bodied sound, and deep clean bass it suppose to have.
It doesn't mean you need to spend much money but you do need to take that as part of your system components.

I won't comment on what brand is better for your system unless you already develop a reference point.

Power cords is more tricky than other cables. For the digital source, the shielded cable (Cleaner and smoother sounding)sounds better than non-shielded (Maybe more dynamic but more noise.) Keep that in mind, even you spend say $500 on a power cord, I don't think the bang for the buck factor exist. For better results, you can build the same version with pure silver and make sure that you got enough teflon insulation and gaps between the hot and neutral ( Fire hazzard ) and you should only use silver for the source not for the amp.

As for amps, it is really power dependent.
On a 14Watt tube amp, I can tell the difference between the 18ga. lamp cord vs the flavor 1. I can't tell much difference when it compared to a computer grade Belden 14-3 cord. I also can't tell much difference between that and a "X-Y-Z brand $500 cord"
I can't suggest which brand is better since I don't have a high current amps (I prefer tube preamp/amp for its openess over SS in the same price range.) Based on other folks feedback, Electric Glide power cord, TG Audio silver, and Elrod seems quite popular.

As for Speaker cables, deep, clean, open and full bodied sound is what I would look for. It is true that most of cable met this requirement will probably cost a bundle ( $500+ in the used market) However, if you have high effciency (92db and up) speakers then the speaker cable is less important. I do own a pair of 80db and another pair of 94.5db speakers. A good speaker cable would improve a lot more on the 80db speakers. However, a cheap and bad cable sounded muddy and distorted even on a 94.5 db speakers. Those cables should only be used for night clubs and not for home.

Just my 2 cents