Cable elevators

Pegasus:

If you have some spare time for playing a bit try placing the cups in the normal position, fill with sand attach tongue depressors or similar acting like posts pointing up from the cup, take a rubber band and "crazy-glue it" stretched to depressors, the rubber band will be the contact point to the cable. Use this variation and let's see how it goes in your system.

Cytocycle
What's the anti static you're using to treat the cables?
Thanks

After going to a seminar given by Richard Vandersteen, I made my own cable elevators. He stated that speaker cables should be elevated off the floor at least eight inches and should be four inches apart.
I simply took some left over four by four wood from a neighbors remodel, cut them to eight inch lengths, sanded them and painted them flat black, then put wire tie mounting pads on two sides and wire tied my cables to them.
Viola, cables are now eight inches off the ground and four inches apart. Did, the sound change? Not that I noticed but I like them just the same.....

Wood is not a sufficient dielectric.

I use wood elevators, and due to the compostion of wood, meaning that is deadens electrical impulses, I find that is works very well..IMHO.