Actually, Nottingham came out with the thick platter as an option resulting from the American market which demanded a "thicker is better platter". Tom Fletcher, himself, will tell you that he prefers the original platter on the Spacedeck and that his customers in Europe and Japan have and continue to eschew the thicker platter.
It is true that the Gyro benefits greatly from set-up tweaking. That said, it is also one reasons (other than sound) that I don't prefer it (I'm lazy) and may not recommend it to someone who is new to tables or does not have a resource to help them with the table in their home.
When comparing the two tables, I was listening in the shop of a long-time acquaintance who has been in the business for many years. As such, I feel fairly confident that both tables were at least close to their ultimate, respective setups. The Gyro was of the DC variety. I fully agree that this feature improves the table markedly.
As far as updating, 'Nots basic premise is "the simpler the better", so there are not many design features to update. If Fletcher's collective inspirations accumulated sufficiently, he'd probably just do a new model as in the case of discontinuation of the Interspace in favor of the Horizon (a super-value table in its own right).
One thing with respect to the DC motor in the 'Not. It is extremely low-torque, you have to give it a nudge with your thumb to start it up (no on-off switch!). While it is DC, it is also very quiet, in my experience, and exceedingly stable with respect to speed consistency. 'Not and others sell separate power/speed control units - some costing thousands. Experience reports on these with the 'Nots are a mixed-bag, with some claiming improvements while others feeling it is a waste of money that can be spent better elsewhere. A friend of mine brought a VPI unit over and we could not tell much, if any, difference using it in conjunction with the Spacedeck. Maybe, as long as you have a steady and clean power source to begin with, these units are not necessary.
It is true that the Gyro benefits greatly from set-up tweaking. That said, it is also one reasons (other than sound) that I don't prefer it (I'm lazy) and may not recommend it to someone who is new to tables or does not have a resource to help them with the table in their home.
When comparing the two tables, I was listening in the shop of a long-time acquaintance who has been in the business for many years. As such, I feel fairly confident that both tables were at least close to their ultimate, respective setups. The Gyro was of the DC variety. I fully agree that this feature improves the table markedly.
As far as updating, 'Nots basic premise is "the simpler the better", so there are not many design features to update. If Fletcher's collective inspirations accumulated sufficiently, he'd probably just do a new model as in the case of discontinuation of the Interspace in favor of the Horizon (a super-value table in its own right).
One thing with respect to the DC motor in the 'Not. It is extremely low-torque, you have to give it a nudge with your thumb to start it up (no on-off switch!). While it is DC, it is also very quiet, in my experience, and exceedingly stable with respect to speed consistency. 'Not and others sell separate power/speed control units - some costing thousands. Experience reports on these with the 'Nots are a mixed-bag, with some claiming improvements while others feeling it is a waste of money that can be spent better elsewhere. A friend of mine brought a VPI unit over and we could not tell much, if any, difference using it in conjunction with the Spacedeck. Maybe, as long as you have a steady and clean power source to begin with, these units are not necessary.