To Loricraft users

I rinse the nylon brush with distilled water occasionally. I had to stop using the DD brushes as the AudioTop evaporates too quickly to use them.

I certainly have records that the Loricraft fails to remove all pops, but I frequently find that records previously cleaned with the VPI sound more transparent once cleaned on the Loricraft.

If a record is obviously grungy I do a first cleaning pass with RRL Deep Cleaner and a Last brush. That removes the worst of the junk before I use the good DD brushes.

It's not hard to rinse a Last brush and even vacuum it with the Loricraft nozzle, and they're cheap enough to toss when they get soiled.

Like Tbg I rinse the DD brushes periodically during a cleaning session. I then brush them off using the long-bristled Loricraft brush, which I don't find useful for anything else except spreading Premier spray cleaner.

Congrats Jeff
May I suggest you give the fluid a little more time to soak into the grooves and use the Loricraft brush to scrub a bit.

I don't use RRL or SVW, but on the first cleaning, I will use a detergent - just 2 drops, with an alcohol solution, which I find helps to remove whatever grudge was there - there's some foam but not much.

Then the 2nd rinse/clean with the Buggtussel Vinyl Zyme Gold, to remove whatever was left by the first wash and to protect the LP surface.

I've not found a single LP which does not benefit from this thorough cleaning, even new LPs cleaned previously on the VPI sound better after the Loricraft. There is more subtle detail in the instruments, vocals, little things you didn't notice before suddenly appear.

Now I'm so used to it that if I don't hear the same level of detail, I will clean the LP again. Repeated cleanings do help, even with the Loricraft.

I may have an incompatibility between my Loricraft and the AudioTop Vinyl One. The cleaner is excellent but is volatile. Even using a good amount in the time that it takes to use a brush on the record and the time for the Loricraft to vacuum off the fluid, there is little on the led in grooves. I tend to get pops and clicks on the led in grooves especially on old previously uncleaned records. I have few problems on new records. Overall, I find the AudioTop superior to any other cleaners I have used, namely that it gives more resolution to records previously cleaner with other products.

I have tried using distiled water as a rinse after cleaning and before I put AudioTop 2 on. It is very volatile and needs no vacuuming. The Vinyl One package discourages this, but it works.

Anyone out there also using AudioTop Vinyl One with the Loricraft?

Loricraft plus AudioTop Vinyl One is one of the combinations I've used. But I tend to keep the AudioTop for special occasions--such as when amnesia strikes. The volatility is a headache. Really the AudioTop people ought to sell the stuff with a special hyperbaric chamber to use it in.