Hi Fernando. It is only a transformer, and I believe the impedance figures for the 103R is different from the plain version. You'll have to work it out with the supplier, but I foresee no great problem since the Finnish fellow custom-winds his transformers. Keep us posted as to how the Denon works out with your present transformer.
No. 26 - MM or MC board?
Hi - I am trying a ML 26 preamp w/phono stage in my system, (Denon 103R cart.). I set the gain internal switch to 58dB or 38db and cartridge gain to 100 Ohms which I beleive is the recommended load for the Denon (instruction come in Japanesse so I can´t tell).
The point is that eventhough sound level is acceptable at the 1 o´clock position in the volume knob, there is not enough dynamics compared to the line level input (CDP in this case) and far from my previous Michael Yee phono preamp signal.
Could it be that this particular No. 26 has a MM board?
The 100 ohm setting is wrong for the Danon 103r?
Thanks for sharing your experience and knowledge here.
Fernando
The point is that eventhough sound level is acceptable at the 1 o´clock position in the volume knob, there is not enough dynamics compared to the line level input (CDP in this case) and far from my previous Michael Yee phono preamp signal.
Could it be that this particular No. 26 has a MM board?
The 100 ohm setting is wrong for the Danon 103r?
Thanks for sharing your experience and knowledge here.
Fernando
- ...
- 37 posts total
- 37 posts total