2. cables
  3. 1080308910

Sagging power cable at IEC outlet - any remedies?

My power amp has its IEC outlet going into the back flat, and every cord I have tried including the light stock cord sag from the cords weight behind the amp. So in all likelihood the connection isn't as strong as it should be. I know connection strength matters at the other end of the cord going in to the wall outlet, is it the same here?

For others suffering from this problem have you found a way to prevent the cord sagging out?
soliver
psychicanimal
1,738 posts
 
How about Cialis?
vegasears
1,173 posts
 
Legos, I stacked a few under the cable to take the pressure off the connection to the amps. My kid has never missed them.
magnepanmike
57 posts
 
I measured and cut some wood blocks for under the connectors of my geat.

I also like the Lego idea!
ezside
31 posts
 
A #2 Vibrapod worked for me.
lngbruno
210 posts
 
What I did was glue a piece of plastic (the thickness of a piece of a cd jewel case) to the top of the plug. This created a snug fit and stopped the sagging. However, for added assurance I then used a strong rubber band and affixed it to the top of the handle I have on the rare of the amp. This has worked fine over the years. OBTW, thess are all things I had laying around the house.

Good luck with your solution,
Lou
More to discover