Trans Temp W, Magic Diamond cartridges - comments


Thanks to these forums, I feel like I know everything there is to know about ZYX's, but has anyone anything to say about the new Transfiguration Temper W? How about this year's cult fave, the Bluelectric Magic Diamond (Lloyd Walker's current favorite.)
128x128nsgarch
From what I understand, the "V" has gone thru (3) versions. Output levels of .25mv, .34mv and .38mv. The Profundo website was last updated under the specs section to indicate the .34mv version. The newest "w", I was told puts out close to .6mv.
I'm loving this thread, everybody is being so civil and informative! Thanks Raul, Reb, Speedy, et al. I'd like to know what everyone has found to be the best loading for the Transfiguration series. I'm using 100 ohms with my W right now. It's a convenient preset on my (ML 25s) phono preamp. Perhaps I should customize it up or down? What are the rest of you using?
Nsgarch: +++ " From the foregoing, you can understand how I came to the conclusion that the cartridge (and arm) should be parallel to the record surface, and that I should expect to see the stylus "point ..." +++++

You are right. But as you know this position can change with a different audio system/ears/music priorities.

Regards and enjoy the music.
Raul.
Nsgarsh,you are a GOD.Thanks for prodding me into a bit more experimentation!As I have just(last week)gotten my SOTA COSMOS back,from the latest update,and added a Symposium Ultra Shelf as a support,I did some more experimentation last night.Stayed up 'til 3:00am.Well guess what?You are right.My tip sounds best a WEE BIT tilted back.Unbelieveable!!That does mean my 2.2 is tilted down,in the rear.AND my instructions print,as your's do.Thanks for questioning me.

One thing I've learned here,is NOT to take myself too seriously,as I can always learn new stuff,about "The art of music reproduction in the home",by being open minded!

As for loading,I am at 47k,but there could be a better setting,for all I know.I have tried all the settings on my phono's outside switch,and the 47k sounds best to me,but,what do I know?I'm not about to start sodering resistors,inside the unit,unless I had real confirmation,about optimum,in my own gear!I did find 100 to be slow,on my set-up,but all set-ups are different.Thanks,and good luck to all,who have replied to this interesting topic!

By the way,I have a BEAUTIFUL LP,of a handbell concert,recorded in a Church(in Princeton NJ)using bells weighing up to 17lbs.Incredibly detailed an dynamic,with multiple bells adding to a true room filling,and floor to ceiling perspective.This has been a FABULOUS disc,to dial parameters into,due to the fact that it is really easy to "get off" on the incredible open, lilting and almost vaulting sound.However if the cartridge parameters are not perfect,you lose the metallic sound,and the bells begin to sound glassy.Especially the tiny bells.If you have all set correctly,and this is where I MUST thank you,Ngarch,the final vta,yields some of the LOWEST distortion,sweet and airy bell tones(one really must hear this disc to believe how great it is)imagineable.So STUNNING,in fact,that I laughed,last night,at the thought that I did not own diamond tweeters,and only had "lowly" titanium drivers,that were ONLY ruler flat to 25k!

The name of this treasure is-The Pealing Bells Of The Westminster Handbell Choir!Cost me a buck,at the Princeton Record Exchange.Finding gems like this,to me,is what this hobby is all about.Not, how much technical knowledge I have picked up over the years.The knowledge we obtain,should only serve the "accuracy"of our systems.Being open to questioning,of our own practices and experiences,only furthers our understanding and ultimate enjoyment!!

PS-If anyone could add experiences as to the subject of phonostage tube rolling,I would be very interested.As my amp is a modded Rowland(2 chasis)8t,with switch mode power supply in second chasis,I only have 3 tubes to deal with,which are in the phono section of my Pre.Thanks to all!!
My V will be delivered on Tuesday. I plan to start with VTA alignment by ignoring the body and taper of the armtube. Concentrating on the angle the stylus is at when VTF is at 1.9gm. I have the ability to infinitely adujust VTA with my set-up. From there, I'll spin the tunes and not be too picky until break-in occurs. I tend to prefer minimal cartridge loading. In my case, the phonostage I'm using allows 22k and down. My experience with loading down MC's has not been very positive.