Dan ed,thanks!The Vector seems to be a great arm.I will say,with confidence,that the 2.2 can yield shockingly good results,far more so than most owners,or competitors would admit too.You have to go "Hands ON",and really learn the slight voicing options that it offers.Right now I'm set,though if I were to make a change it would likely be the Schroeder REF!!A fascinating design that I would love to hear at some point!!
Vector tonearm and static issue?
Hello vinyl lovers! I am trying to track down an issue that seems to be associated with my Vector Model 1. I'm hoping that you folks with more experience can help me solve this issue.
I have developed what seems to be a static discharge through my analog front end. This discharge sounds similar to a vinyl pop that we all are familiar with. I have ruled this simple answer out by re-playing the same track and no pop. Also, this discharge does occur frequently when the platter is spinning and the arm is still on the rest. I have been in contact with A.J. and he has been very helpful. At his suggestion I have verified continuity from the tip of the spindle to the end of the bearing ground wire. I have also checked for shorts between the cartridge clips and the tonearm ground wire. Still get the popping and last weekend it seemed to get even worse.
There is an upside as this forced me off my lazy butt and last Saturday I installed my Graham 2.2 with an IC-70 cable. Narry a pop since. I did make one other change and that was to mount a Glider M2 instead of the 103R that was on the Vector. I suppose I should mount the 103R on the 2.2 to rule out the possibility of something going wrong with that cartridge.
Oh, before changing arms and cartridges I also tried swapping out all of the tubes in my phono stage. Also, this does not happen with my CDP so I think I can rule out the preamp.
Is there anything else I should check? Anyone got any neat tricks to try?
TIA
Dan
I have developed what seems to be a static discharge through my analog front end. This discharge sounds similar to a vinyl pop that we all are familiar with. I have ruled this simple answer out by re-playing the same track and no pop. Also, this discharge does occur frequently when the platter is spinning and the arm is still on the rest. I have been in contact with A.J. and he has been very helpful. At his suggestion I have verified continuity from the tip of the spindle to the end of the bearing ground wire. I have also checked for shorts between the cartridge clips and the tonearm ground wire. Still get the popping and last weekend it seemed to get even worse.
There is an upside as this forced me off my lazy butt and last Saturday I installed my Graham 2.2 with an IC-70 cable. Narry a pop since. I did make one other change and that was to mount a Glider M2 instead of the 103R that was on the Vector. I suppose I should mount the 103R on the 2.2 to rule out the possibility of something going wrong with that cartridge.
Oh, before changing arms and cartridges I also tried swapping out all of the tubes in my phono stage. Also, this does not happen with my CDP so I think I can rule out the preamp.
Is there anything else I should check? Anyone got any neat tricks to try?
TIA
Dan
- ...
- 11 posts total
- 11 posts total