Speaker cable aging?

If you are satisfied with cables, I woulld be inclined to hold onto them and buy a cleaner/conditioner. Something like Caig Pro-Gold. Its not that expensive & could make a world of difference.

Sometmes the terminations oxidize where the electron flow isn't what it once was. Especially in a damp enviroment. I doubt speaker cable technology has advanced that much in five + years. Just my 2 cents. Good luck.

Hello,

Thanks for your advice. I did refit the amp end of the cables last year to have a locking banana plug. The original spade was to hard to fit on the back of my amp (It was a Bryston 3B at the time). The speaker ends are still terminated with the factory spade with shrink wrap.

From what I have seen online these cables sold for $600 - $700 when new, so I am inclined to think they are not the weak link in my system.

The rep I was talking to was from Paradigm. I was expressing my feelings on a mid range suck out with my Studio 40's. I have felt for a long time that the recessed mid range is holding back the potential of this speaker. I would like it to be a little more forward. I can however understand why paradigm tuned the speaker this way, seeing as a good number of people would be driving it with a cheap receiver they wanted to make the speaker more polite rather than unforgiving.

My local dealer does not carry the Paradigm Signature line so I was asking about them. I was looking to replace my Studio 40's with a used pair of Martin Logan's. The problem is due to my location I am unlikely to find a pair locally so I was considering some used Focus Audio 688's or 3a de capos as alternatives.

The paradigm rep said I really should hear the Signature as they were made with the audiophile in mind and not the average consumer like the Studio line. He is coming back in december and was going to try and bring some S2's for me to listen too (as in a in-home demo). He really is super nice and willing to go out of his way to help. We talked for about 3 hours and discussed everything from speakers to cables to vinyl. Paradigm might not have the best product in the world, but they have some of the best service and customer relations as far as I am concerned. I have no problems trying support the company, as they really do care about me as a customer.

I have read lots of good things about the Signature line so I am excited to hear them. Have you guys ever had a chance to listen to them? If so what were your impressions?

Anyways, back to the cable subject, I would like to replace my cables with some silver ones. I just feel that the $1000 or so it would cost to do so would be better spent on some better speakers, as what I have is not that bad, assuming they have not gone down hill (which is my original question).

Anyways, thanks again for your help and sorry for my post being so long.

Nickway,

I had demo'd the S2's in a showroom for about a half hour, and while a brief demo, I came away very impressed. Midrange was very natural and was definitely not recessed. There was a review of them online somwhere, yes?

If you are serious about new speakers, definitely hold off on new cabling. It wouldn't make sense to get new cables and then introduce new speakers which might not go well with the cables. You would want to choose your cables to fit the speakers.

Regards,

It is always possible that any cables made of metals can have oxidation over the years. As stated above, it is likely that it only would occur near the ends, but it is possible to have it all the way thru too. Connections are particularly likely to exhibit this.

Whether it will make a very large difference in the sound of the system would likely be related to the individual system in question.

Alas, very few things will last forever.

a while back, Michael Fremer (I think it was in his column) wrote about cleaning all his contacts with some metal polishing cream and how much it improved his system. I've had noticeable results from just using some hardware store polish. it's quick, easy and cheap; what the heck?
that being said, before you buy new cables, whether it's with your existing speakers or new ones, why not audition them in your system to see if the difference, if any, is worth the $1K?