2. pc-audio
  3. 1301238057

digital room correction

My system consists of the following:

B&W 803S
Mac 352
Mac C41
Wyred4 Sound dac2

I have a fairly congested great room as far as furniture, but have managed to get my speakers about 44 from back wall, but unfortunately around 46" from side wall. I do have a cabinet between speakers, but speakers are fairly far infront of the cabinet. Listening position is about 9 feet from each speaker.

I have tried for years with moderate success to position my speakers. My soundstage is OK and my detail is pretty good, but I never have reached the holy grail that I read about, which is more depth, wall to wall soundstage and that holographic feel.I am starting to think its a myth (seriously)after hundreds of repositions.

I know my room is tough. I really like my Dac2 and have been using J River 15 as my software. Has anyone played with their limited room correction, Is there a good, reliable but not too technical room correction package that may help get me to the next level?
dmm53
audioengr
3,282 posts
 
The reason for the 1/4 round tubetraps is to eliminate the effects of a HD screen or in your case, the cabinet. You will have improved imaging, depth and width. I tried to show you an example, but the moderators nixed it.

I personally have a combo HT and 2-chnl system. The only reason I can do this is the 1/4 round ASC traps and their specific positioning.

Steve N.
Empirical Audio
dmm53 OP
63 posts
 
Steve, I assume that the specific positioning is in the far corners behind the speakers? Is it just that easy?
jtwrace's avatar
jtwrace
443 posts
 
Steve,

Let's see some measurements of before and after. Post in your circle for all to see.
audioengr
3,282 posts
 
"Steve, I assume that the specific positioning is in the far corners behind the speakers? Is it just that easy?"

No, the traps should be 1.5-2" behind the inner back edge of the speakers. Start with the backside of the trap being parallel to and along the inside edge of the speakers. Then rotate them outward a few degrees at a time until the centered vocalist becomes diffuse. Then rotate back. Then you will have the best mix of image focus, depth and width.

Mover them closer to the speakers or further away to get the best overall focus.

Steve N.
Empirical Audio
More to discover