Ben:
Before you can simulate the code or use the original remote wand, you must have a remote chip installed in the DDEv3.0 and a small jumper.
You can open the case and see if it has a remote chip installed or a jumper board near the front of the unit.
You can also tell if the unit has a remote chip or not by changing inputs or volume and power down/up. If it remembers the previous setting then you have the chip.
Ki
Before you can simulate the code or use the original remote wand, you must have a remote chip installed in the DDEv3.0 and a small jumper.
You can open the case and see if it has a remote chip installed or a jumper board near the front of the unit.
You can also tell if the unit has a remote chip or not by changing inputs or volume and power down/up. If it remembers the previous setting then you have the chip.
Ki