Crackling sound when using a DAC

Some CD and DVD players stop producing a digital signal when there is no disc in the drawer or "stop" is hit. This "unlocks" the DAC, resulting in noise. When a disc is inserted, the transport starts sending out a digital signal, causing the DAC to respond and lock onto the signal. The "locking" and "unlocking" is what may be causing the noise that you hear. This noise could be potentially dangerous to your tweeters, so you may want to think about discontinuing the use of your DAC and / or getting another transport. This is just a guess though, so keep that in mind. Sean
>

I also have a Museatex DAC and have the same experience, albiet mine happens more occasionally. I asked John Wright about the noise and he explained that the initial click you hear when the "CLock" indicator illuminates is caused by the DAC recognizing the signal and opening the output relay. In turn, the "crackle" that you sometimes hear from the speaker is the result of a tiny residual DC voltage that can be present until the servo catches up and nulls it out. This is normal and rather low in level, so it shouldn't pose a threat to your tweeters. However, if you're worried about it then just turn down the volume or hit the mute button when cueing up a disc.

I always get a quick, loud and sharp crackle...its bad and very loud. I've tried everything, I have noticed that it only happens after closing the CD drawer and the cd begins to load, the speakers burst out in crackle. I have avoided this problem by switching the Museatex to optic settings, then switching back to Wire (coxial) when the disc has loaded and playing, everything seems fine.

Surely there has to be a better way so I can get rid of this very unpleasent distortion and not have to worry about switchin my DAC settings everytime I change a disc.

pbawcutt,

Do you mean that the crackle doesn't happen when the DAC's optical digital input is used ("I have avoided this problem by switching the Museatex to optic settings, then switching back to Wire")? This sounds odd, because the phenomenon that I described is totally independent of what digital input is used. Like I said, a small crackle sound is normal, but in my experience it isn't as bad as what you're describing. Perhaps your amp's input sensitivity and/or your speakers' sensitivity is higher than mine, which is exacerbating the issue. However, I doubt this is the case given that there are many Museatex DACs in the field, and I've never heard of a "normal" unit behaving like this. I'd suggest three things:

1. Try using the DAC with a friend's CD player/transport, and see if the same problem occurs. This would at least rule out that it's related to the NAD's coax output.

2. It may turn out that your unit has a problem, like a bad servo circuit that's failing to null the DC properly. It's therefore a good idea to send John Wright an email. You'll find his contact info at www.museatex.com, and I've found him to be great to work with.

3. A properly functioning unit is going to exhibit the occasional mild crackle when the CLock engages. It's simply the nature of the beast. In the end, if it turns out there's nothing "broken" with the DAC but you just can't live with this issue, and turning down the volume when you change the disc is not a satisfactory solution, then perhaps this relationship wasn't meant to be.

Best of luck.