2. speakers
  3. 1003025967

DCM Time Windows

Have recently acquired a pair of the orginal Time Windows by DCM.They represented an outstanding value when new and in the pre owned market little can touch them. Presently powered by a Robertson 4010 Amp and RGR PreAmp.One of the most transparent and seamless speakers I have ever owned.It is to bad that DCM chose to discontinue the Time Windows.Any suggestions on proper room placement appreciated.Also should spikes be used with the Time Windows?
ferrari
kthomas
911 posts
 
I have a pair that are probably 20 years old. I have to believe they need re-habbing - definitely they do aesthetically, but they don't sound all that good anymore either (or maybe I've just gotten used to nicer stuff?) Does anyone know if it's possible to get replacement drivers, etc. for these? -Kirk
sean
6,231 posts
 
Kirk, i don't recall what woofers were used in these, but the tweeters were made by Philips. Similar replacements can sometimes be had from Parts Express from time to time. The cost on these range from $6 apiece ( on sale ) to about $10 - $12 normally.

I would first look at the woofers and see if they need work. If they appear to be okay, which i doubt at this point in time, i would then think about replacing the internal wiring and capacitors. None of this is hard to do. If you take your time and make a VERY SPECIFIC log book BEFORE you attempt removal / replacement of anything, you should not run into any problems. Believe me, the log book comes in handy should you have to stop what you're doing and come back at a later time or date. Besides that, it gives you documentation as to what was done, how you did it, etc... should you ever need to know. This info can also be used to help others out should a question come up. Sean
>
joe_b
421 posts
 
I had a pair of what were either 2nd or 3rd generation Time Windows. I'm sorry I sold them as they were a very forgiving, yet enjoyable speaker. I used an RGR Preamp and BRB amp with them. I placed them about a foot from the rear wall. Tried stands for them, which did not work. I placed some extra carpeting under them which helped a little. Also agree with facing them forward for best imaging. They present a spacious sound, but do not have the focus of some speakers. Nevertheless, they were very enjoyable and a bargain for what they did.
liskei1c88
1 posts
 
As a previous owner of the original Time Window (1980), the sound was greatly improved by raising them on 9 inch stands. A steel stand shaped to the base of the speaker was sold after market, but I made my own. A mid range coloration was removed by raising the speaker, especially on vocals. The speakers also sounded more open by raising them. The speaker gave me a lot of musical pleasure, but I think they were colored compared to modern designs.
audiotomb's avatar
audiotomb
1,112 posts
 
I had a pair of the early 80's time windows before they changed out the drivers. I gave them to my brother when I upgraded to B&W Matrix II's. Very neutral speakers with a nice soundstage but a bit subdued in the high and low freq.
The QED was a nice speaker also.

Trivia extra credit

Does anyone know what DCM stands for???

answer at 11
More to discover