SUBWOOFER FOR MUSIC

Aram,

Actually, I think the E.5s have very good bass. Accurate, fast and fairly deep. There are a lot of false perceptions on bass. Many coming from some units that lack in low frequency response and are peaked up in the higher bass regions to give the impression that they go low. My only reason for getting a sub is to cover the range below 35 Hz, and mainly for HT.

Chris

Ozfly are you bi-wiring your Paradigm 100's??I am thinking of bi-wiring them as well..about the jumper cable;I heard that before as well..I think I am going to use a quality cable instead of those jumpers

Yes I am. I'm using them generally for home theater and am currently running them from a sunfire amp which has both a voltage and current output to the mains. I am hooking the mid/tweeter to the voltage? and the woofer to the current? -- maybe it's the other way around. Sounds quite good. Much better than when I used the supplied jumper from Paradigm. For your system, I suspect that a single out that is then split for two speaker inputs would be quite acceptable. Basically, for each channel, you can use either 1) one cable with a single amp connection that is then split and offers two speaker connections or 2) two cables -- you just connect both together at one of your amp outputs (i.e., both into your A right and two more into your A left).

Will I have to put the B channel on (which is not recommended) as well if I want to bi-wire with another single run of my current speaker cable ?

No reason to as far as I know. Let's say that you have four separate cables: Woofer Left (WL), Tweeter Left (TL), Woofer Right (WR) and Tweeter Right (TR). You can hook the amplifier ends of WL and TL to your Left A output and the amplifier ends of WR and TR to your Right A output. There are many fine cables that offer one input to the amp with two separate outputs to the speaker. You may also be happy with high quality jumpers -- hook the speaker cable to the woofer and the jumper from woofer to tweeter inputs. Good luck.