Help Total Confusion

I have a 57" widescreen TV in the middle of my speakers. My speakers are about 2 feet closer to me than my TV. When I completely cover up my TV with a large sheet of duct board, which is made of 1 inch thick fiberglass, my soundstage becomes more transparent / open. There is definitely alot of audio energy coming off the back and sides of speakers. So, the audio rack or TV in the center of the speakers reflects alot of sound.

As others have said, you can make this work fine. Move your speakers out as much as you can. If you lack center fill they're either too far apart or you might try a bit more toe-in. Try pointing in until the center image is solid with a full-width stage.

When you say "between the speakers" do you mean it literally, as "actually between the speakers" or somewhat behind the plane of the speakers? While I cannot say that tremendous improvement has occurred, I did change my rather large rack 50"tall X 22"wide X 19"deep)for something that is not as deep (15")and not as high (32"). This resides along the front wall. Since the speakers are 44" from that wall, I am confident that the sound is not adversely affected. I think that the whole vibration thing is bogus. No valid proof exists that ss or even tubes, which are more microphonic, are affected by vibration. TTs are another story altogether. I do feel, however, that having any kind of furniture around the speakers and between speakers and listener affects the acoustics and should be avoided. Other than that, I wouldn't lose any sleep over these questions. Keep it as far from the speakers, as low and as narrow as you can insofar as furniture, racks etc. are concerned and enjoy the music. Good day.

I have an entertainment center (about 5 feet tall and 5 feet wide) between (but 2 or 3 feet behind) my speakers, and I don't notice any negative affects. I suppose it might sound better if it wasn't there...maybe...but what I don't know won't hurt me, will it? I think it's probably more important to worry about the space in front of the drivers.

Pbb, i find your comments interesting. If heavy footfalls / extremely powerful low frequency output can cause a digital source to skip ( which i and many others have experienced ), wouldn't lower level vibration potentially cause the player to potentially mis-track and / or use more error correction ?

I've also experienced a MAJOR change in system sonics simply by changing racks. I would not have believed it if i had not experienced it first-hand. This was NOT subtle nor was it "for the better". After shelling out hundreds upon hundreds of dollars for a new rack in one of my systems, i was NOT pleased with the results AT ALL. The rack i was using weighed well under 40 lbs at most. The new rack clocked in at 150 lbs. Nothing else changed as i kept all of the same components and cabling, etc... I can see no reason for a change in system sonics when changing a rack other than the equipment being "sensitive" to vibrations and other forms of energy transfer.

My brother, who comes over frequently and listens with me, commented almost instantly that the system sounded like "mud" i.e. slow, heavy, lacking air and space. He stated this the first time that he heard this system with the new rack installed. This system normally had very powerful bass with excellent "slam" and phenomenal harmonic structure and air. I had noticed the same thing but did not know if i was imagining things or not. I did not want to think that my "new investment" had taken me several steps backward. Changing the amp tilted the tonal balance back towards neutrality but the system was still lacking the finesse that it once had. Going back to the original rack solved the problem. Once i had done that, the system was back to sounding somewhat lean but now had the harmonic structure and air that i was used to. I then switched back to the original amp i had in the system and everything was back to normal.

I think that this system change was the result of several factors working at one time. The added weight of the rack changed the resonance of the floor. You see, this system is on a suspended floor and the floor DOES vibrate. By changing the resonance of the floor, the amount of energy coupled from the speakers was also influenced. Besides that, the rack was noticeably taller than original one being used. Since the speakers in this system are omnidirectional, i have no doubt that this might have affected the radiation / reflections in the room, changing the amount of direct vs reflected sound that i was hearing. I will not deny that these factors MIGHT have played a very important part of the differences that i heard.

Having said that, i began changing shelves in a couple of different racks using different types / weights / densities of materials for the shelves. Some shelves made a marked difference in the sound of the system. This leads me to believe that the ability of a shelf to transfer or absorb energy DOES influence the sound of a system. Whether you as an individual have experienced this or want to acknowledge the potential for variances in sonic reproduction would be dependent on your mind-set. I know that i was VERY much a "doubter" when it came to racks, speaker cables, interconnects, power cords, "tweaks", etc... a few years back. Being an electronics professional by trade tells me that none of this type of stuff "should" affect anything. Personal experimentation and having an open mind ( not initially though ) has made a world of difference. Not only is this difference apparent in my attitude, it is apparent in the performance of my system. Sean
>