B & W Nautilus

Thanks, I have the option to place them to wherever in the room needed, and any acoustic conditioning is fine as it will be purely a dedicated listening room.

Just I was worried about the space provided, I have mixed opinions on the effects of a room that small, some opinions vary from loss of bottom end extension which I lean towards, and others feel it will overpower the room and dull the mid to high end.

There are no windows or openings in the room other than a single door at one of the short ends. At the moment I have drapes all around the surrounding walls but I can play with how much they react to the speakers by adding or removing sections.

I have Quad electrostatics already in my permanent residence hence I would like something different for this home. Plus I may turn it into a HT setup, but I doubt that.

Thanks for your advice

Dru

I currently have the signature 805s driven by audioresearch VS110. I'm thinking about upgrading to 802s. I rarely listen at very high vol.. Do u guys think 110W of tubes is sufficient?
Thanks

I'm really not familiar with the Audio Research amplifier. If it will produce also produce current (Amps) not just Watts, then yes it will drive the 802's. Be advised that although the speakers are nominally 8 Ohm loads, they will go under 4 Ohms at times depending upon the music being reproduced. Hence the need for an amplifier that will deliver current not just Watts.

I would think at moderate listening volumes most any amplifier would drive them just fine. What I noticed with the first amp I had, was that several crescendos in a row would tax the output stage.

The system never got harsh or distorted, but the bottom end would sort of just go away. The first crescendo would have slam to it, the second less so, the third even less. So the music depth got less and less until the music got back to "normal" level, at which point the amp could catch up and replenish the output capacitors. Your tube amp shouldn't have that problem.

You might want to consult the manufacturer or your owner's manual to see how the amplifier works with low Ohm loads. If it will drive a 2 Ohm load, I would think it would work fine.