Isolation question. Monitor on Subwoofer

Tom

I did not take your response that way at all! This is what works in my system and worth a try since you can do it cheap. Threads are meant to pass along good information to other members so they can become educated and get their system to sound better. Good information can hopefully improve ones system and I still try things out every month, just ask my wife, box after box is delivered by the UPS guy/gal. The exchange of ideas has helped me over the years I have been a member on Agon.

Funny, I just got this sent to me:

http://www.6moons.com/audioreviews/gingko2/minicloud.html

Peter thanks for the info. What works in our own separate worlds and experience is the most correct one at that portion of time. For you to stop at this point of time and with your open mindedness and desire for further knowledge on this particular subject would be a waste. Some of the products and techniques I have mentioned here so many times before, I feel are fundamental to the music. What I am a proponent of increases the efficiencey of any electro or mechanical device sitting on the platform or point.I have measured this acoustic gain..The detail, the gain in dynamic contrasts, the stage size, the focus all become more apparent,separate yet whole....Coherent and correct..I can tell you from the heart and the ear, isolation is not the key to the enhancement of the musical source.I can tell you there are exciting enhancements to the source that I have measured, recorded and photographed that will come to light in the next year..Tom

Straddle with spring system under the subs. And spring directly atop the upright of the the straddle table/frame decoupling the stand mounts, would probably work very effectively.

Of course working out effective spring rates for >3 hz isolation would be the key. The straddle frame wouldn’t need to be too heavily built if you use the most rigid part of the structure, the uprights to hold the sprung mass of the speakers.

Ensuring the standmounts have ample outriggers to accomodate the movement of the center of gravity remains within it’s base., to prevent it toppling over.

Clearly defined budget, aesthetics, and goals should be considered before any design and serious implementation be undertaken.

For example you could put a Townshend poudium on a frame which straddles your sub, but similar results by springs under a frame/straddle structure. You’re going to want someone to weld something up. Perhaps heavy timber could do similar.

Straddle mentioned early on is a good option in my opinion.

Slappy - I was working out in the field when I read this thread. On my 80 odd mile drive home I've been thinking of your question some more.
I guess to answer it better, I'd need to ask you some pertinent questions.

The answer that's going to yield you the best results is really based upon, what you have and the technology and knowledge of those answering your questions... but really it's what you put into action.

What materials are your subs made from? Weight of subs?
Height of subs?
What stand mount speakers do you have?
What is your budget?
Are you looking for an inexpensive solution DIY, or are you after something that really delivers?

Are you interested in experimenting with a limited budget before committing to more serious and costly approach?