Why so many Merlin VSM's for sale??

in my case, it was an upgrade to a bigger speaker.

to answer your question, after living w/ the VSM-Ms for 3 yrs, i can say without question that they deserve the class A rating...i've heard many much more expensive speakers that impress less.

rhyno

Royy, I've owned the VSM for 4 years. I've gotten to know them pretty well. It is a very picky speaker with respect to upstream components. The "M" version is supposed to be a bit more forgiving with respect the this. But regardless of Bobby's attempts to make the speaker more forgiving, the fact still remains that the speaker is ruthless about upstream components. If you have junk anywhere in the system, it will be exposed.

The VSM is a damped speaker system. Many amplifiers utilize a good bit of damping and feedback. Put those amps on the Merlins and you get a cold, overly damped sound. That is why some had made the mistake in the past of saying the Merlins are bright. My own experience is that zero feedback tubes amps, in particular my Joule OTL, sound best. The Berning is also oustanding and probably the best for the money. There are solid state amps out there that can be a good match as well. My Joule allows the Merlins to sound like they are supposed to - full, rich, textured midrange, solid bottom end, extended highs.

I am telling you this because I think at least part of the reason you see a number for sale is that people give up on them before they match them with the right equipment. I was not particularly happy with my system before I got the right equipment in front of the VSMs. I tried some solid state amps and a few tube amps that were not the right match and I was rewarded with poor results. It was very frustrating. I was trying to do it "on the cheap" (relatively speaking). Now I am getting to where I want it to be with the Joule stuff, and just as importantly, I know exactly what I need to make the system top notch.

Sure, some may be selling because they don't like the VSM. Although, can you find a show report of someone saying the Merlin roomed did not sound "good" and in most cases "spectacular" ---> Proper components, proper setup. True, some may want the last Nth of bass. And, some people sell speakers like they change their socks. But no doubt about it, the Merlins are at least, "Class A". If I ever were to replace them it would be with an Electrostatic, probably Soundlab. Otherwise I would not bother. I have not heard a more resolving, dynamic speaker than the VSM. Especially not anywhere near the money. I am not aware that a better 2 way exists.

Jim

I sold my Merlin VSM-Ms but I think they are great speakers. Both comments above are right on target. They are very responsive to upstream components and require some time and effort for setup. That said, I probably would not have enjoyed them nearly as much without my Tact RCS 2.0 that allowed me to bring out a warmer tonal balance (personal preference). I never tried the BAM but rather used a sub with my Merlins. -- If you watch A'gon long enough, there seem to be waves of certain pieces that pop up and then disapear. After nearly two years, two Wright WLA12As showed up in quick succession. I bought them both. Haven't seen any since. Just another possibility for consideration.

This question was asked previously. The above responses touch on the reason why many give before realizing what these speakers are capable of. Tonally I have not heard a better speaker than the VSM, they are just superb in this regard. Add to this their extreme resolution SOTA in my experience and immediacy and you have a transducer that prioritizes system matching to realize their capabilities.

While I feel they work well with a wide variety of tube gear, they are worthy of the best one can afford. Best in my experience with this speaker are the Joule and Berning as Jim notes above. Equally important as the amp interface is the wiring. They will highlight a synergy problem in this regard so it is very important to get it right. A bad choice can lead to less than stellar results and frustration. Bobby P is the best resource for the ones that work with his speakers. Silver cables in my experience are a no no with the VSM contrary to what I have read from others.

The main things to consider with the VSM are amp interface, wiring and room size. I am not sure they are the best choice in a very large room. While they can be played loud they are MUCH better at more moderate levels. They WILL play loud and their dynamic capabilities are quite extraordinary but lets face it, they can't compete with a large system in a large room in this regard without sounding pressed. A subwoofer might help in this regard but I can't imagine one that wouldn't compromise the electrostatic coherency that this design is capable of. These speakers are all about refinement and resovlving the musical information present on the recording. Bobby P is working on a sub for folks that want more bass but in my medium sized L shaped listening room, I feel no lack in this area, it just won't have the power of a larger system. The VSM does orchestral and large scale choral quite well with a wide and layered presentation of the venue.

The last and most important thing to consider is the presentation. The Merlins are about as neutral in this regard as any speaker I have heard. A close miked recording might not sound as appealing on the VSM's as a speaker that is voiced to pull back the sound and they may sound "bright" to some listeners but to me they present the music as it was recorded. Some won't like this but I feel that the design is near perfect in this regard. Honesty sometimes comes with a price but on balance it is well worth it. As you might guess I love the speakers but also recognize the fact that some listeners will feel they are maybe too fussy and give up. If you choice them and stay committed after the purchase and have a small to medium size room, you will be rewarded with a musical package that is tough to beat at any price.