Revel Salons in an enclosure?


In an attempt to hide my large Revel Salons, I am considering placing them behind cabinets. How much will this compromise it's sound? I know the Salons have a rear port and rear firing tweeter.
lktanx
The will not sound good, and I have heard them used as you describe.

Century Stereo (in San Jose, CA) had a pair of Salons in large receases/enclosures in the wall, which had a fabric covered door. They used them in their premium home theater room. While they worked okay for HT; for music, they really did not work. The soundstaging and imaging was completely gone. The frequency response was ruined as well, as the enclosure rolled off both the treble and the bass.

My advise; Don't do it! Either find another way to make them work out into the room, move them to another room, or just sell them and get in the wall or ceiling speakers.
It will destroy the soundstaging -- the speakers must be well out from the back wall to soundstage properly -- and almost certainly make the bass unlistenable because of the rear port and prodigious bass capability of the speaker.

In short, it would be a usage of the speaker that was absolutely not intended by the designer.

Sell the Salons and buy a speaker that is designed to go in-wall.

PS - I own Salons
Thanks for the opinions. It is a serious question as it involves incorporating the Salons in a HT setting. The room will be re-done by a designer and cabinet maker, I can place the Salons in Front of the Cabinets and lose some room or I can have them inside cabinets, save some space make the decor look better, also ruining its sound. An alternate is to design the cabinetry for inwalls, and place the Salons in front of then, that way if I sell the house, I just remove the Salons and re-fit the cabinets with in-walls. I have heard that it is a bad idea to place them inside cabinets but I just wanted to get the technical reason for it. I feel I owe it to the project to look further that it being a "sacrilege". I might also need to look into speakers with smaller depth. The Salons are 26" deep. I heard the Wilson WP7s are only 18" deep.


Another HT store in Montclair, CA had them this way as well. They were not functioning when I visited. The store owner said it made little difference. I am more concerned about the audio aspects.

From reading the Revel Salon manual, they said that if you got very close to one speaker, the frequency response would be the best. So in a way the frequency response might not depend on the rear tweeter if you sat at the proper location. If I allow the rear port to breath thru the rear of the cabinetry, maybe it would not effect the bass sound staging as much.

Does anyone have any technical studies or publication with measurements on this topic?

>>>
The will not sound good, and I have heard them used as you describe. Century Stereo (in San Jose, CA) had a pair of Salons in large receases/enclosures in the wall, which had a fabric covered door. They used them in their premium home theater room. While they worked okay for HT; for music, they really did not work. The soundstaging and imaging was completely gone. The frequency response was ruined as well, as the enclosure rolled off both the treble and the bass.
<<<