Will I notice improvement with crossover mods?


I've finally discovered that the difference in sound between my two Hales Transcendence 5"s is due to a difference in crossover values between the two speakers. Aparently one of the speakers was at the correct values but the other speaker's crossover was off by over 10%. I've decided to repair the speakers by having both the crossovers completely redone with new caps, coils and resisters. The crossovers of both speakers will be upgraded to better parts and they will be the same correct values(evenly matched).
My question is that will I notice a big improvement with this upgrade/mod? I am having Solen foil caps replacing the old caps, Hepta- Litz coils replacing the old coils and improved resistors although I do not know exactly which ones. Opinion would be appreciated.
128x128mitchb
I should note that the design of the Hales crossovers will remain the same and the values will be as Hales intended. The only difference is that the parts will be better and will be matched to each other between the two speakers. The Hales design will remain the same.
Hello Mitchb..I am no expert but you should hear a difference. I strongly suggest using better caps than Solens on the tweeter/midrange section of the crossover.IMHO the Solens are fine on the bass section.If your going to do it right... put the best caps you can afford in the midrange/tweeter area. Maybe if you can swing it try some Mundorf Supremes.These caps are used in Audiodata, Audio Physiks, Avangarde Acoustic, Burmester, German Physiks, Hedler & Hoffmann, Magnat, Outsider, PHL, Sehring,Verity Audio, Symphonic Line, Trenner & Friedel. Also a lower grade version of the Supreme is used in the Sonus Fabers! So these caps are the real deal! Also if you can swing the Mundorf Silver PIOs,these are are the top of the line Mundorf caps..the Supremes are no slouches thou.Just to give you an idea the Sonus Fabers Cremonas floorstanders($8000.00) a pair use the Mundorfs 4 th best capacitor..the Supremes and Silvers are number 1 and 2 on the list!

Make sure your resistors are non inductive and spec within 1 % of each other. Here's a review of a few caps. The Crescendo and Sonic Caps are also very good! At the moment I am using a mixture of all these caps except the Mundorf Silvers.

http://home.hetnet.nl/~geenius/CAP.html
Your responses appear to open a whole new can of worms but I am limited for now with the caps that the speaker componay I am using uses. However I can always play and experiment in the future should the mood move me. Are the caps I'm getting decent at least? There all I can get for now. Thanks
The Solens are going to sound a tad bit harsh on the tweeters.If it were me that speaker company would have to get me the Mundorfs! If your paying to have this done at least see if you can order those parts and let them install them for you. I sure hate to see you waste your money.But if that's the best you can do I understand. In the back of your mind ..you will be haunted and wondering how much better those speakers can sound! Are your upgrades being done locally?