2. misc-audio
  3. 1025542941

Power Cable or Power Conditioner?

Right now I am running a AES Signature SuperAmp and AE3 preamp with a Cary 303 100 CDP through B&W CDM7nts. They are all plugged into a 'Tripplite' power conditioner/surge protector. Right now Im not sure if I should start replacing power cables (if so which ones first) or get a new power conditioner. Ideally I would get a mid level Monster Conditioner or if I really stretch a used PS Audio PS-300. (not sure if I can afford this) I would like to spend under 500$ for a conditioner (any suggestions) and I would absolutly refuse to spend more than 100$ on a power cable. (anyone have thoughts on Blue Circle Power Cables they seem reasonably priced and well made?) Long story short..HELP! Someone steer me in the right direction!
squiddy
squiddy OP
29 posts
 
Wow thanks for all the help so far. But I guess Im still kind of torn...seems like monster will make an improvement over my Tripplite but some feel monsters will make matters worse? As far as power cables...should I start with the my CDP?
hotrod
60 posts
 
i would get a ps300 with mw first, it is one of the best improvements you can make, try running your front end and pre thru it. later get cords, have ps labs and jp master ac very good prices used, anyone in ks area welcome to listen to my system . mike
alliedtvandsound
74 posts
 
Hello: It is my belief that a direct connection (with a quality power cord) to an AC wall outlet is the best method --this is particularly true I feel for power amplifiers. The caveat here is that, ideally we would have 2 or 3 seperate AC lines (on the same electrical phase from the electrical box) in which we could connect our audio equipment. Naturally, some of us (including myself) reside in an apartment with limited AC outlets and questionable AC quality. Which brings me to my suggestion; simply try a power extender strip with detachable AC inlet--(Wireworld electrifier about $50 or PS Audio --$200). Purchase a decent power cord (XLO PL-1500, approx. $150, or Kimber PK-14 also about $150) to connect the outlet strip and then plug all of your components into the power bar-extender starting with the highest power cosumption component first (amplifier), then preamplifier etc. If at all possible, try connecting any digital component into a seperate AC outlet. CD player's/DAC's really do put a lot of noise back into the AC line.

From my experience, power conditioners/surge protectors tend to "soften" the sound too much --impairing transparency, focus, clarity and dynamics.

peter jasz.
asmith
9 posts
 
I would recommend picking up a high quality used power conditioner first. You can find a used AudioPrism Power Foundation II or III in your price range used and start from there. Its like buying good cords for all your components at once. Then you can upgrade your cords when you can afford too. I bet you won't go back to stock again! :)
nrchy's avatar
nrchy
2,124 posts
 
I don't know where you live but in most places the power company doesn't consider voltage fluctuations of twenty volts to be excessive. Your equiment will work under these conditions but it will be handicapped by what's coming in the wall.
I know it's not what you want to hear but I think you will be much better off to bite the bullet and go for the ps audio P300. Regardless of what comes in the house the ps audio will constantly supply you with the power you need. I don't know enough about the Monster power conditioners. I looked at them once at a stereo shop but wasn't impressed by them or the salesman. I'm not sure the perform the same function.
Actually I built another power cord yesterday. I only needed a four footer and I calculated the cost to be about $46. I've seen and heard a lot of power cords and I know you would have to spend over $200 to better these cords.
More to discover