2. speakers
  3. 1096408521

Gallo reference /TAS vs Me

I spent a fair amount of time listening to the new reference speakers from Gallo a few months ago and dismissed them as closed in-particularly in the mids- and opaque in the soundstage and generally disapointing. Now TAS puts out a review which goes against everything I heard. Am I losing my hearing or are TAS and I listening to two different speakers? FYI the dealer used Musical Fidelity electronics with the Gallos and I listen with Maggie 3.5s and BAT electronics.
banksfriend
kalan
185 posts
 
Vladimir, Thanks for your tip about the forward/back tilt. During the time when that extra forwardness came through with the Gallos, I had already tried tilting the speakers back with some improvement, but that did not address the heart of the issue.

I have solved the problem I was experiencing (and I think I mentioned re-tubing my amps and adjusting their bias differently making the biggest improvement in a post shortly afterwards.)

Since then, more break-in time has helped further--just as some posters said, and better placement in the room, etc. The 100-hour break-in recommendation is probably correct.

The Gallos two main strengths seem to be their ability to recreate a good approximation of the musicians' physical presence, and they have an engaging, musicality that focuses on the musical program's content rather than on HiFi.

Some of the Gallo reviews pretty much say that they are giant killers. I am not as sure as that. Unless I have not figured how to get the most of them---could be likely, I would say the Gallos are good at some things, but not everything. Like anything, listen carefully before you buy.
rolloff
130 posts
 
I purchased a pair about 2 weeks ago. They absolutely need braking in as everyone has said. Don't know how they sound with SS yet as I'm running tubes for now. Dissapointingly, someone at Gallo told me it will be until "at least" the end of the first quarter before the sub amps are available. Has anyone els had problems with the grill covers? One of mine was bent at the top lateral cross mount, I took it to the dealer and got one of his as a replacement and it too was slightlt deformed and difficult to apply.

Thanks,
David
kalan
185 posts
 
Rolloff, if you mean by "... top lateral cross mount" the metal cross member that has a hole in it through which you secure the allan screw for the grill "cage," then I believe they are supposed to be bent.

Both of mine were curved or bent in a precise way to accommodate the distance difference between the cage and the curved main pillar. If you notice the middle back cross-member (for another allan screw) is also offset or slightly curved/bent. The bottom cross-member should be straight.

The top cross-member curve is much greater than the middle cross-member's curve. This all looks to be deliberate design to me. Unless, of course, I misunderstand your post. Wouldn't be the first time.....
rolloff
130 posts
 
Kalan.
Actually you illistarted my point, sort of. One of my speakers has the grill so that all of the lateral support cross memmbers are straight AND line up perfectly for inserting the threaded screws. The other, as described, did not. It seems the jig that they make these on is a little fickle, or, that the frames change shape once formed. I say the latter as after testing of one of my dealers grills that he assured me fit well when new, and had been placed asside for demo purposes, now does not fit well with the top cross member needing to be bent in to reach the column.

David
jcruse
15 posts
 
One of my speakers' grill frame top cross member was also bent, whereas the other was not. Hard to tell if the frame or the speaker are out of kilter. Didn't bother me too much, because I prefer the look without the grill frame.
More to discover