Aging of capacitors within crossover networks


Hi folks, I have red that capacitors within loudspeaker's crossover networks show aging with regard to their characteristics (inductance, capacitance, reactance etc.) which has consequences for the crossover itself and finally also for the loudspeaker's sound. Are you familiar with this phenomenon? Does this mean that loudspeakers which are 10 years or older must undergo filter modification (replacement of parts)? What is your opinion?
dazzdax
From personal experience, I recommend that drivers need new suspensions after 6 or 7 years. Despite their looking fine, I was shocked to find mine COMPLETELY deteriorated. The improvement in sonics via slam, immediacy, bass, and naturalness was astonishing. This is far more critical than capacitor aging.
The premise that

more expensive = better sound

or

more botiquey = better sound

is what I find to be a fallacy. Sometimes it's true, sometimes its' not. Unless you try every reasonable value of every type cap in a particular application, there can be no conclusions drawn one way or another. IMHO, the manufacturer is a lot more likely to have done experiments like that than any end user is likely to do.

most expensive parts do not equal necessarily better sound. Case in point re: caps - I'd take a vintage (read: cheap-ass $2 or so) paper-in-oil cap over ANYTHING made by Blackgate, for values where it's appropriate (mostly power supply stuff). there couldnt' be a greater difference in price vs. hype vs. quality of sound. The cheap ugly oil cap sounds and performs way better than the overrated Elytic.

-Ed
What do you think of this statement by Rod Elliott of Elliott Sound Products:

"Non-polarised electrolytics are a different matter, especially when used in crossover networks. These have a tendency to lose capacitance as they age, shifting the crossover frequency with disasterous results (sonically speaking). Because the loss is gradual, you may possibly not even hear it until the tweeter has almost stopped working, as you get used to the sound over a period of time. Unless all bi-polars age at the same rate (unlikely), you will start to notice a difference between the two speakers. This is your cue to head off to the electronics shop and buy some replacements (non electrolytic, preferably)."

Because of this I started the thread.
Gee, Ed, I'm glad I never said any of those things and never recommended Blackgate.

I'll say it another way:
1. Speaker manufacturers use the best-sounding parts they can WITHIN SEVERE PRICE CONSTRAINTS.
2. There are LOTS of better-sounding caps out there that lots of us know about and have heard in our own systems that sound better than the generally inexpensive stuff most manufacturers use in their crossovers.

Stop accusing me of saying what I didn't.
Process control bsed manufacturing produces parts that are within a spec range. If the spec range for a cap is 10%, and sampling indicates they are within that range, they don't tweek the process further - it is in control. If (and this is a big if) - a speaker works better with more tightly controlled values, the manufacturer will have to test or buy selected value parts. If a copmpany is selling selected value parts, that means the stuff they sell everyone else is by design farther off nominal. I know that Spica used to measure their caps, and match caps individually to balance out their differences. That is why there are so many caps in a Spica crossover.