Best Amp for Timbre, Depth and Spatial Resolution?


I have an Ayre CD player, BADA Alpha DAC, deHavilland Mercury pre-amp, CJ MF-2500A amp and N802 - am looking to upgrade amp.
Would like to hear views on Best Amp for Timbre, Depth and Spatial Resolution.
Not married to tube or SS..
Always wonder about Stereophile recommended components such as Aesthetix Atlas, Parasound JC-1, CJ LP-125 and the likes. I would pay about $5k on Agon so there are some limitations.
Thanks.
128x128johnmc67
The 802N has a very old tweeter what can become harsh. So you need a warm souding amp. And you a lot of power and a high amperage to control the paper units of the 802N.
I should have asked in my 1st post, but what is it that your system lacks? Is there something you need to improve or are you generally happy and just want to improve without loosing what you already have?
Once again, I disagree with the assertion Atmasphere makes again in his last paragraph.
Based on my experience, I think that Ralph (Atmasphere) is spot on with his comments in the last paragraph of his response.

Johnmc67 - if you are looking for a substantive change or improvement in your system's sound (timbre, depth and spatial response) I would suggest that you consider different speakers. Not that I'm suggesting that there is anything wrong or lacking with your N802s, but the most effective way to make a major change in the sound of your system is by changing the components that actually generate the sound and interact with the room.

If you had an electric car and were looking to improve the ride to be smoother, would you first replace the tires or the voltage regulator?

Bill
Unsound, if you would like I can show you a letter from Steve McCormick that disputes your position. It was written to Paul Speltz, who is known for the ZERO autoformer and the Anti-cables.

The letter states that with the DNA-series amplifiers they sound better driving a 4 ohm load through the ZEROs as opposed to direct), wherein the amp is loaded at 16 ohms, despite the fact that the amp has no trouble whatsoever doubling power into 4 ohms and can drive that load all day.

I also have spec sheets on a good number of solid state amps. Take a look- you will see that the 4 ohm distortion level is always higher than 8 or 16 ohms. This distortion is composed of a variety of harmonics, including the 5th, 7th and 9th, which contribute brightness and harshness. Take those things away, or reduce them and the system is instantly more musical.