Where do the tubes go?


I have so far been a solid state guy, but I am looking into another system, and I would like to give tubes a try.

1. Would most people recommend an all tube system, or do you recommend starting with only a tube component or two.

2. What are the relative merits and disadvantages of placing tubes at various stations in a system CD-->pre amp --> amp ?

For instance, I have read that some people feel that that the micro-distortion (pleasing though it may be) is excessively magnified if started at a source component then magnified through a bunch of high power solid state electronics. Others have advocated that having tubes early in your system gives the tube sound quality and allows for higher power, lower maintenance/heat solid state amplifiers.

For the tube experienced, how where should I start integrating tubes? (starting a new system so disregard concerns of mating to existing equipment).
aceofhearts
My reply is, for the most part, good tube and good SS have more in common than not. In my case, I use a transformer-based passive line stage, a tube phono pre, and tube power amp(s).

It was not until I built suitable speakers for SET amps, that I really noticed the difference between tubes and SS, and push-pull tube amps.

The musicality of the 300B tube has opened up a richer connection with music than I've experienced before. It's something I recommend you experience. If you have a friend, or dealer, that has equipment that does justice to music as done by high-sensitivity speakers, and SET amps, go have listen.

Happy Thanksgiving, regards,
Dan
I have never had a tubed source, but I've had tubed pres with ss amps and vice versa. I'm most comfortable with tubed pre and amp, but if you have been all ss and want to experiment by dipping your toe in the water, go with a tubed pre as it will have less tube impact. But a tubed amp and ss pre will provide more of what the tube devotees hear.
Dan, that was very well said and I agree with your thoughts concerning SET amplifiers. In my experience tube power amps contribute a greater change than just going with a tube preamp(though this is not a bad choice by any means). Get a speaker that mates well with a tube ampand I believe you`ll be pleased.