2. amps-preamps
  3. 1386182417

Rogue Audio Cronus Question

I'm just getting used to a new(used) Rogue Cronus (not the Magnum) - and I noticed that if I leave the tuner on (Aux 1) while listening to the turntable (Phono), some faint music from the tuner comes out of ONE of the speakers. It's in phono mode, and obviously I can get rid of the sound by simply turning off the tuner, but why would that happen, and how can I correct? Thanks.
doublenickelsonthedime
yogiboy's avatar
yogiboy
5,759 posts
 
You can try shorting plugs in the unused inputs. My tuner bleeds over but not when the phono is playing! You can make your own plugs by using some cheap rca type cables,just cut them in half and twist the positive and ground together!
djohnson54
396 posts
 
The first thing that I would do is double-check your cable routing. Make sure that the tuner interconnects are well away from the phono interconnects. Phono gets the largest boost in signal strength in a system so any stray noise will get boosted along with it. It's also especially important to keep phono interconnects away from power cables for the same reason.
simao's avatar
simao
1,837 posts
 
My Tivoli 2 radio does this. Never knew it was a cross talk circuit thingie, but that makes sense.
abecollins
219 posts
 

As others have said it's called crosstalk and the phono input is most susceptible because of it's high gain (relative to the other inputs which are line-level).

Use short, shielded phono interconnects and route them away from other cables. And just turn OFF your tuner when not in use, no big deal.
pehare's avatar
pehare
835 posts
 
My Cronus Magnum used to bleed thru to the speakers ever so slightly when using the headphone section. It was enough my trying-to-sleep wife would complain.
More to discover