Why no soud in Sonic Frontiers Line 2 SE preamp

Has it worked in the past or did you just get it? You may want to try taking the batteries out of the remote or moving it far away from the unit. Also, have a look inside and make sure the ribbon cables that go from the main board to the rear board are not damaged or unplugged. Try a different input as well.

Zd542, yes it worked before I moved. I do not have the remote control. I checked ribbon cable and looks good. I tried different input, but no difference. A new development was that my preamp does make output sound, but output sound level is too low. have to turn up about 65 level to listen. I believe that I used to listen about 20-25level. Any idea why the output volume is too low?

Yes my Line 2 opens with 2 sets of three dots and can go standby by pushing stanbay buttom and go to automatically BAL1 with h30.0 and 30.0 output level. I can select nay inputs. If I push tape, then Tape is shown the upper right corner. If I oust SSP, then nothing will be shown in display. Somehow I can listen sound by volume level 65. Why is it so low?

Thyssen,

Double check all input and output connections.

What are you using for a front end source? CDP? TT?
If CDP does it have 2 sets of outputs? Maybe one set fixed, the other set variable? If so make sure you are using the fixed outputs.

Do you have something else you can use as a source, maybe a DVD player, hook it up to the preamp.

What power amp are you using? Could that be the problem?

If possible do you have a dealer or friend that you could take the Line 2 preamp to and hook it up on their system. That will tell you for sure if the preamp is, or is not, the problem.
.

JEA48, Yes I have checked all connections and source outputs and even my power amp. They are all normal. Though, still my preamp sound level is too low. Why is my preamp output too low? what might be the main reason?