"Interesting part is the further I moved the speaker in the corner out the bass became muddy/boomy."
When you listen, is your focus on the speakers, or the sound in the room?
If the first, bass might be perceived as more muddy with speakers away from walls as imaging detaches from physical location of speakers somewhat, but may sound more like live music if your focus is more on how the room sounds with the speakers playing.
Also you could certainly be getting bass resonances in certain locations, but those probably would change somewhat as actual location changes, and not necessarily on relation to distance from wall.
If two much bass, try loosely obstructing the ports for comparision, using a very loosely rolled up low density fabric cloth, or maybe try foam port plugs as an option. loosely rolled up socks will even make a difference and might help.
Experimenting with ICs is another option that can make big differences in bass performance and a lot cheaper than switching main components. With my gear, I use MIT Terminator ICs for more bass when needed, but prefer DNM Reson ICs for good balance top to bottom with coherent midrange. Either can be had for not much, particularly if used.
Some very basic power conditioning like a simple monster power strip to source and maybe pre-amp (not power amp) is another tweak that can often help with cleaner bass.
Myself, I would not change any major gear until I had what I have dialed in first as best as possible. That helps to identify what might work best from there better if further changes are still needed.
Unfortunately, I have not heard your stuff, but on paper, the components seem of good quality and well matched in general for good performance. That's a very good place to be to start prior to experimenting with these kinds of easier and less expensive tweaks to get things really tuned in, which often makes all the difference in the world.
