Tannoy Speakers & Bi-wiring


I have a pair of Tannoy Canterbury speakers using Atma-Sphere amps. Currently I am using single wire (audience AU24) and the supplied brass jumper. Wondering what the experience of any Tannoy users out there is in bi-wiring and what kind of wires you have used. I'm thinking about trying this with a budget of about $1,000 used so really can't get into the mega expensive cables. Really curious.
redcarerra
Bi-wiring helps them. All the typical reasons given for bi-wiring miss the technical reality, but there are clear improvements for clear reasons, and the Tannoys respond.

Which Atmas and how is the bass?

You'll find many different opinions on bi-wire, but I do believe it is best to do a true bi-wire, this is what Vandersteen recommends, which is 2 separate runs of identical cable. IMHO, I would agree with Stereo5 and use Audience Au24 jumpers to replace the brass ones. I tried bi-wire with different speakers and different cables, and it always seem to lose coherence compared to single wire with matching jumpers. This article seems to explain why,

http://www.sonicdesign.se/biwire.html
I have played around with Biwiring with my earlier ATC and my present Tannoy Turnberry SE. With ATC, biwiring has a tremendous effect on the positive side, no negatives at all. With Tannoy however I prefer single wired sound. It is tighter and more coherent with single wiring. Biwiring makes it sound less grounded and more hifi overall. Go for a high quality speaker cable and Tannoy's own jumpers which they supply for the Canterburry.
Kiddman,

The amps are M-60's v 3.1. I find the bass in my room great, full and articulate. Previously I had Merlin speakers and when I whet from Quicksilver V-4's to the Atma-sphere's, I think it really brought out the bass more. Of course with the Tannoys, and the much larger driver, all the more. The Merlin's were really quick though.