2. analog
  3. 1390867966

empire 980 arm mistracks with various cartridges

Hi I have Empire 598 with 980 arm that mistracks with all cartridges used. All carts function fine in other turntables.
No matter how heavy I set up the VTF going way over limit of the cartridge specified it will still mistrack and would not output anything bellow 160Hz. So all bottom end is completely sliced away. When I tap on the plinth, bass comes back for the flash moment.
So far connected ADC Series II, Pickering XV15, Shelter 501 with no success. What may cause such brutal mistracking and lack of resolution?
czarivey
atmasphere's avatar
atmasphere
11,861 posts
 
Have you adjusted the arm height? That can play a significant role in the bass playback.

Also, the plinths on the original Empires are pretty well a joke. They resonate quite a lot. Also, the bearings in the 980 are quite fragile and they may not be functioning as designed.
czarivey OP
5,946 posts
 
Hi Ralph, I've tried ALL heights possible and they all sound same. My empire has suspension plinth and is one of the decent ones. I'm thinking about fitting different arm do you have anything in mind for the tight budget?
czarivey OP
5,946 posts
 
I think that arm-tube bearings at least one is loose -- the one opposite to VTF dial adjust. Any options to pack it with some light grease?
I'll appreciate responses!
storyboy
80 posts
 
It's probably your bearings. Carefully place a 1/2 inch square of plain paper on the tonearm gently while it's floating at zero grams - if it does not move, you have too much friction.
More to discover