2. analog
  3. 1395967278

SME 309 Headshell Postition

Hey Folks,

For the first time I removed the headshell from my 309 so I could send my Kleos in for a checkup. Upon reinstalling said Kleos and pushing in the headshell I noticed a spring action. Do I push against the spring action and tighten or not? It's another one of those procedures where we humanoids need another arm/hand combo.

Thanks,
Robert A. Ober
128x128Ag insider logo xs@2xrobob
robob's avatar
Ag insider logo xs@2x
robob OP
202 posts
 
Hello,

Thanks for your reply. Unfortunately the manual is not specific. Once the headshell is pushed in, one cannot see the slot can one?

Thanks Again,
Robert
robob's avatar
Ag insider logo xs@2x
robob OP
202 posts
 
Anybody else want to help? I would really like to get this right.

Thanks,
Robert A. Ober
mofimadness's avatar
mofimadness
4,984 posts
 
Robert, I'm sorry but the owner's manual is VERY specific on how to do this. Read numbered pictures 115, 116, 117, and 118. This tells you EXACTLY how to do it. Not sure why you're having trouble?
yogiboy's avatar
yogiboy
5,671 posts
 
Push the headshell in and hold it in that position with one hand then with your other hand put the bolt in and tighten it down,once this is done you can release the headshell and you are ready to go!
yogiboy's avatar
yogiboy
5,671 posts
 
I forgot to mention. Make sure you don't lose the nut that the bolt goes into,they are known to fall out!
More to discover