Anti-skating- test records vs. ears

I have a similar set-up as Stan (Stringreen) -- a VPI Classic 3 tone arm. My cartridge is a Lyra Kleos, which is a .5 mV MC cartridge.

I surmise that Stan is drinking the VPI Kool-Aid, which is no AS is best. IME, I can't really hear the difference of using AS. But having said that, replacing/exchanging cartridges is expensive. It has been my experience that a pinch of AS seems to promote even stylus wear .... I think.

So, I use a single donut placed about half-way down the weight bearing arm of my VPI AS gizmo. Is that optimal?? Haven't a clue. But stylus wear so far is even ... I think???

Bruce and Stan, in the other thread I linked to in my post above, Dover and John Gordon, who are both highly knowledgeable about such matters, indicated that in at least some of the VPI designs some amount of anti-skating force is being applied even when none is intentionally set.

Also, when I previously stated that:

In my experience, which is limited to moving magnet (and moving iron) cartridges such as Grace F9-E variants, that kind of setting [A-S = VTF] will invariably result in severe deflection of the cantilever to the left (toward the center of the record), as viewed from the front of the cartridge while the stylus is in the groove of a rotating record. Which is completely ridiculous IMO.

... I'll add that in my experience (as described), setting A-S = 0 results in similarly ridiculous deflection to the right.

Stan, I would therefore not extrapolate any universally applicable conclusions from your own VPI-related experience. Not to mention that any such extrapolation would be in conflict with knowledgeable and plausible arguments presented by Mr. Gordon and others in the other thread, as well as Mofi's exceptionally extensive experience with a multitude of tables and arms.

Regards,
-- Al

Boys and Girls.....I have had a Bogen tonearm, a Grado Lab tonearm, an Ortofon, a Thorens, an SME V, a Helius, and a few more since my 3D arm I have today. I've listened intently to all those arms which incorporate A/S, with and without, and to MY ears, I like no a/s the best. I drink Scotch not koolaid, am a professional musician, I really don't care of the stylus wears funny - although I doubt that it does.....I care what it sounds like. I urge you guys to listen with and without and come to your own conclusion. If you like it fine, if you think that instruments are placed in the soundspace more accurately with more air around them and more depth (what I hear with no a/s) ....its your music...enjoy.

Here's a way I discovered by accident that should satisfy even the most OCD among us.

First, the story...

My brother-in-law wanted me to rip some albums for him. After seeing their condition, I knew that using my best equipment was out of the question. Luckily, I had a cheap Audio-Technica cartridge that I could afford to sacrifice. After I made the wave files by running the turntable through a preamp, and then into my computer's line input, I noticed the wave file graph showed what I describe as tizzy and ragged spikes on the high frequencies of one of the channels. This turned out to be the result of not enough antiskate, rather than his garbage vinyl. A quick antiskate adjustment in the right direction resulted in a perfect wave file.

You need a computer, of course. And, you need a way to get it close enough to your setup. The freeware Audacity is enough to do the rest. It works, and it is an easy enough test to perform.

.

Antiskate is used to counteract skating force which varies across the record surface from outside to inside in nonlinear fashion. Skating force is a function of groove friction, stylus shape, tracking error (impacted by alignment choice), record speed and many other factors. A proper approximate anti skate setting would allow one to achieve the lowest distortion in both channels across the record. In some tonearms, proper anti-skate works in conjunction with proper azimuth to minimize crosstalk.

I don't think there is a hard and fast rule of setting antiskate as a fixed fraction of VTF.

Use your ears. Proper anti skate allow for least distortion in both channels. Many things to listen for. Simplest is mistracking in vocals. In an orchestral recording, the violin section on the left and the mass strings on the right should play with equal alacrity. Too little anti skate and the violin section lose its luster. You can also listen for soundstage stability during dynamic passages. In low distortion playback, the acoustic space where the recording is made should be fairly apparent. Improper anti skate would produce tracking distortion which mask the subtle acoustic clues. too much anti skate and the soundstage to the right would collapse upon demanding passages.

Many leave anti skate setting as the last adjustment. I feel that it is worthwhile to re-optimize VTF,azimuth, VTA/SRA after dialing in anti skate. Frequently you can lower the VTF very slightly after proper anti skate is done. By lowering VTF, you may need a different VTA setting to achieve the same SRA.

There is a group of people on audiogon and even dealers who feel adamantly that no anti skate is best. They would congratulate you if you arrive at the same conclusion.

" Your setup must be right when you don't need anti skate"

or

" You need anti skate ? That's just a bandaid. Your setup must be off"

I don't doubt that their system sounds best without anti skate. I think of the following possibilities.

1. The anti skate mechanics of the tonearm is compromised. Using anti skate cause other distortions.

2. Some tonearms may have inherent antiskating force. This may be unintentional or intentional (e.g.. force of tonearm cable )

3. Certain cartridges require very little anti skate. The zyx I have tried require less anti skate than lyras.

4. Antiskate setting done as an after thought without re-optimizing other parameters. If you spent hours setting up striving for the best sound with zero anti skate. I trust you have done just that. Adding any anti skate will throw a wrench in there.

4. Poor alignment

I am no authority on the subject but this is a well discussed topic. Many knowledgeable people including Jonathon Carr and Frank Schroeder have contributed. I suggest you do a search for their take on the subject. Skating force is not a tooth fairy. Skating force is significant and produce significant distortion.

I was in the no anti skate camp until an experienced person in my listening group taught me what to listen for.

Regardless of their opinions on anti skate, I congratulate anyone who find happiness in their vinyl setup.