UPgradeing dedicated line components

You might want to check out the Porter Port.

Consider adding Environmental Potentials Ep-2050 and ground filter Ep-2750 at the panel.Plenty of info in the archives.

I have a similar system,in that my two power amps are on two separate dedicated lines, and so is the cd player on a third dedicated line.
The phono stage, TT,and Lightspeed attenuator(for the cd/sacd player)are plugged into a Hydra8 power conditioner, also on a foutrh separate, but not dedicated line.
Dedicated lines are great, but I wanted an even more direct route from the panel to my gear.
So I did away with power cords and outlets,and instead of those what I have done is to terminate each of the 3 dedicated lines with a Furutech F1 48(R) plug.So that's two mono power amps and one SACD being powered up with no breaks from the panel,except for the IEC's.
This I think is worth stating.

The money saved on after market power cords and outlets(I now have spare Shunyata Anncondas and my Furutech GTX D is on the 4th non dedicated line)could better be spent on upgrading the IEC at the end of your dedicated lines and plug them into your gear.
I find this has given me more of all the things we are always searching for.
I always believed in the less is more type of audio and this set up is proof enough for me.
A few years ago I rained down all manner of criticism towards those I labelled "wall pluggers".
I still feel upgraded power cords, conditioners,and wall outlets are still needed when dedicated lines aren't an option.
But becoming a "panel plugger" is now where I feel most comfortable.

Thanks Lacee, I did think about doing this myself. Makes sense to remove the outlets. Are the AC cables from the panel standard Romex?

Yes they are but # 10 guage, and the breakers are 20 amp.